Sagem chirps and freezes?

[johnlogie]

Sagem 2x chirps and freezes. tried sportster pro and blade but still no differnt. Any ideas?

[plasterer]

Yer
Stick with Blade
and alter the Cams and ucodes to suit
Am local to you if youget stuck ........................Paul

[johnlogie]

I know how to change ucodes but how do u do cams and wot do u change them to?

[plasterer]

To The one that works mate
Put it on Eve get it running
If that no good
Change to G Box
Then push Copy *eys
And Copy From Evo to G Box thats it mate .......Paul

[ruprect]

Gbox solved a very bad chirper my mate had, it was andromeda 2.0 but blade quad should be just as good.

[Arth]

My sagem 2x box chirps and freezes with most images too. Only seems fine with Gbox (had andromeda running fine till AU stopped). Got Blade Quad running now, but the channel search does not work for me.

[MysteryV]

I'm getting chirpsing and freezing with Blade Quad, using Gbox and Vortex. It was fine with Blade Trinity. Any ideas??

I'm thinking signal is either too high or low. Values are:
BER = fluctuates between 10 and 150
SNR = around 63000
SIG = 24929
Bitrate = fluctuates between 1000 and 5000

Any help would be grateful...thanks in advance guys..

[MetMan]

I'm getting chirpsing and freezing with Blade Quad, using Gbox and Vortex. It was fine with Blade Trinity. Any ideas??

I'm thinking signal is either too high or low. Values are:
BER = fluctuates between 10 and 150
SNR = around 63000
SIG = 24929
Bitrate = fluctuates between 1000 and 5000

Any help would be grateful...thanks in advance guys..

use blade trinity and transfer the new rom file over

[brett90]

I also had alot of problems simular to this with the Sagem boxes, but i moved to a Nokia box and havent had the same probs...

[johnlogie]

Ive got a nokia and a sagem. nokia's alot better. If anyones lookin to buy id advise gettin a nokia