Nokia DBOX 2 was working before scan

[PETERG]

How do I get a boot log?

found how to get a boot log, will get one & post tonite when I get home.

Cheers

[PETERG]

Bootlog

found how to get a boot log, will get one & post tonite when I get home.

Cheers

Here it is I hopeif someone could take a look & let me know what is going wrong I would appreciate it.
bootlog.doc

bootlog.doc

[plasterer]

Peter copy and paste the info as a txt doc ............Paul

[EAMO 2]

Peter copy and paste the info as a txt doc ............Paul

HOW'YU, Paul,
Glad to see you're alive & kicking

[PETERG]

Is this right now

Peter copy and paste the info as a txt doc ............Paul

hopefully this is ok, if not please let me know. cheers

bootlog[1].txt

[PETERG]

Is this ok for bootlog?

Grab a bootlog and paste it into a txt file and attach it here it could be here a hardware fault or the tuner might have gone weak and you might need a booster.

is this ok for bootlog. Cheers

bootlog[1].txt

[Tommo1973]

is this ok for bootlog. Cheers

[ATTACH]4600[/ATTACH]

Peter,
Did you see my previous post? was box receiving channels prior to flashing?

[PETERG]

Peter,
Did you see my previous post? was box receiving channels prior to flashing?

yes was receiving channels, no problem, updated to get espn, then wouldnt work so flashed with commando 10 & now "waiting for time"

Cheers

[Tommo1973]

yes was receiving channels, no problem, updated to get espn, then wouldnt work so flashed with commando 10 & now "waiting for time"

Cheers

Bootlog looks OK (tuner registering etc), try a different image (plenty in the downloads section) or wait for Commando11.3 (due out this weekend) and flash that.

[MetMan]

Hi mate,
It is a nokia DBOX2, another member e-mailed me a working image, which I have flashed on to another box I use at home on the same feed without any problems.
the readings I am getting are:

BER min 100000 max 262143
snr min 1 max 50324
sig min 0 max 61816
bit rate min 0 max 0

Could this be a tuner fault????????

snr min 1 max 50324

ur snr is too low u need 55000+ to recieve channels.....chk all connections, feeds, splits, cables etc....if the box was working b4 then the signal to noise ratio has dropped for a reason....another split, if under carpet chk the carpet grippers etc......the antennae socket can become loose etc...if nothing try a booster
cheers

[Tommo1973]

snr min 1 max 50324

ur snr is too low u need 55000+ to recieve channels.....chk all connections, feeds, splits, cables etc....if the box was working b4 then the signal to noise ratio has dropped for a reason....another split, if under carpet chk the carpet grippers etc......the antennae socket can become loose etc...if nothing try a booster
cheers

He say's he cannot receive any channels and is getting waiting for time, I do not believe the signal readings are a true representation. i would as you suggest check the feed to the back of the box as this could have been disturbed. I would still reflash as it seems too much of a coincidence that this issue arose immediately following flashing command10 ,it only takes circa 10 mins to flash and the original post was made 3 days ago reckon it's worth trying.

Tommo

[PETERG]

No Better

He say's he cannot receive any channels and is getting waiting for time, I do not believe the signal readings are a true representation. i would as you suggest check the feed to the back of the box as this could have been disturbed. I would still reflash as it seems too much of a coincidence that this issue arose immediately following flashing command10 ,it only takes circa 10 mins to flash and the original post was made 3 days ago reckon it's worth trying.

Tommo

Re-flashed & connected to first feed, no splitters or connections, still not getting anything, only waiting for time???
could tuner connection be damaged & if so what can I do?

Cheers all.

[Tommo1973]

Re-flashed & connected to first feed, no splitters or connections, still not getting anything, only waiting for time???
could tuner connection be damaged & if so what can I do?

Cheers all.

Did you try different image?

[PETERG]

Did you try different image?

No still using the same image as it was sent to me as a full working image, all the whistles & bells etc, etc. Don't know how to get or where to install. If you have a full working image & don't mind sending it to me then please PM me.

Forgot to mention that the previous installed image was also an older commando image, so can't understand why this one wont work.

[Tommo1973]

No still using the same image as it was sent to me as a full working image, all the whistles & bells etc, etc. Don't know how to get or where to install. If you have a full working image & don't mind sending it to me then please PM me.

Forgot to mention that the previous installed image was also an older commando image, so can't understand why this one wont work.

There are a lot more "bells and whistles" on the latest commando images. Will send you pm shortly (just uploading files).

Tommo