Channel Unavaivable Problem

[druid]

Hi
Hope someone can help me here.
I have a segram Dbox 2 and have installed 2 differant images and scanned the channels with no problems the channels clear for a couple of minutes then if you change channels the screen says channel unavailable and stay black. If I reset or switch off the box and then back on again the same channel clears again then goes to channel unavailable.
Please help
Many Thanks

[plasterer]

Try your box Directly to the wall
With out any splitters or Attenuators
Lets know how it goes then .....Paul

[druid]

Hi Paul
Thanks for the reply the box is connected right to the wall and has no splitters etc connected.
My Eurovox box is working fine on the same cable?
Cheers

[Erazor786]

Try changing the Ucodes and the CAM as aswell. sometimes this makes a difference.

On most images it is the blue button to access the menu with the setting for the CAMs and the Ucodes settings.

Hope that helps m8.

[wakkaday]

sorry to highjack thread...but what are the good ucodes / cams to select? having similar probs

[Erazor786]

There are no good or bad CAMs and Ucodes AFAIK.

Each box reacts differently to different Ucodes, 001A is normally one which i have found to work, and as far as CAMs are concerned the new ROM files released for the new Keyroll work best with EvoCamD.

Hope that helps.