TX2 timeout in bootmanager

[Tommo1973]

Hi All,

Trying to put a Nokia dbox2 into debug mode and keep getting tx2 timeout error, I have attached the data from the bootmanager com window and would appreciate any help resolving this


Thanks

Tommo

[Fergal]

Board: ### No HW ID - assuming TQM8xxL
Its not recognising the mb
does the box still but up ie lade then premier
what flash chips does it have intel or amd
are you getting the box to go into the reset loop then shorting it to get the five blocks before starting the dbug procedure

[Tommo1973]

Board: ### No HW ID - assuming TQM8xxL
Its not recognising the mb
does the box still but up ie lade then premier
what flash chips does it have intel or amd
are you getting the box to go into the reset loop then shorting it to get the five blocks before starting the dbug procedure

Hi Fergal,

The box does boot i.e lade and then premier, it has 2x intel. The box goes into reset loop and am able to short it to get the five blocks. I get icache is on and as you can see from the file following the chorus 800000 command it just keeps reporting tx2 timeout
Is there any reason it would not recognise hw id?

Thanks
Tommo