dbox help please

[walkman]

My box was crashing non stop, could'nt even enter the menus without it crashing.
I've flashed a new image with IFA. On IFA it says it says Flash Process Terminated but it's like the image is on the box, it loads up but then the same again it keeps crashing, I can't even do a channel scan.
This is the log from IFA.

Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.1.202:192.168.1.8::::ff
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
i2c-core.o: driver i2c-dev dummy driver registered.
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRG1
ttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:b0:aa
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x4000,blocks=8
1: offset=0x20000,size=0x20000,blocks=63
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.1.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.202, domain=, nis-domain=(none),
bootserver=192.168.1.8, rootserver=192.168.1.8, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface


















dbox2 - ImageFlashingAssistent 3.0

- Hallenberg.com -



Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
done.
Sende Backup...
L?sche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)

-------------------------------------------------------------
BootP: Got request from 00509C1BB0AA
BootP: Created ARP-entry with IP: 192.168.1.202 and Mac: 00509C1BB0AA
BootP: Answer to 00509C1BB0AA sent
BootP: Got request from 00509C1BB0AA
BootP: Created ARP-entry with IP: 192.168.1.202 and Mac: 00509C1BB0AA
BootP: Answer to 00509C1BB0AA sent
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer succsessfull completed
BootP: Got request from 00509C1BB0AA
BootP: Created ARP-entry with IP: 192.168.1.202 and Mac: 00509C1BB0AA
BootP: Answer to 00509C1BB0AA sent
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer succsessfull completed
BootP: Got request from 00509C1BB0AA
BootP: Created ARP-entry with IP: 192.168.1.202 and Mac: 00509C1BB0AA
BootP: Answer to 00509C1BB0AA sent
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer succsessfull completed
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer succsessfull completed
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer succsessfull completed
TFTP: Sending C:\Users\Billy\Desktop\LHC_2x\LHC_2x\LHC_fta_2x.im g
TFTP: Transfer succsessfull completed
TFTP: Writing backupimage to C:\Program Files\DBOX_IFA\Backups\2009-09-07 21-39-20_696.img
TFTP: Transfer succsessfull completed
BootP: Got request from 00234E007DB5

------ Extra Informations ------
Selected Network adapter: Broadcom NetXtreme Gigabit Ethernet (1)
IP-Adress of the Network Adapter: 192.168.1.8
IP-Adress of the Dbox: 192.168.1.202
Operatingsystem: Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
CPU 1: AMD Turion(tm) X2 Dual-Core Mobile RM-70 @ 2000 MHz
CPU 2: AMD Turion(tm) X2 Dual-Core Mobile RM-70 @ 2000 MHz
Filename of the Images: LHC_fta_2x.img
Imagetype: Two Flashs
DBOX-IFA Version: 3.1
------ Powered by http://www.dboxservice-hallenberg.de ------

[walkman]

Thats it getting rid of this box. I've tried 4 images and it still keeps crashing .
Can someone please pm the best place to buy a dbox 2 from?

[walkman]

I left box running after it crashed and it shut down its self now started again but just keeps crashing.

[Bulld0g]

Have you tried dfferent cams and ucodes ?

[bWg4life]

what cables u using when flashing, crossover and null? if i ever use IFA i only use crossover and allways works.
Have you tried to FTP the image instead? although if it keeps crashing can u get into services menu?
im not great on the tech stuff but read IFA can be iffy and should only use as a last resort.
I wouldn't give up yet,keep trying,someone in the know will help u,takes time.Mines almost gone out the window loads of times and its very frustrating at the best of times

google dbox2 theres a online uk shop that will come up first probably ?90 odd but have a warranty or fleabay.de can pick up quite cheap

[bWg4life]

I left box running after it crashed and it shut down its self now started again but just keeps crashing.

just thought,its a long shot.Is there a button stuck somewhere,remote or box.I had a crap remote and the d button kept getting stuck,when i pressed another button my box used to go haywire.

[mini]

i would recommend flashing Blade Quad and trying different ucodes as in the above post. Try putting a booster on so you can reduce signal aswell as make it higher. See if thats work.

[walkman]

what cables u using when flashing, crossover and null? if i ever use IFA i only use crossover and allways works.
Have you tried to FTP the image instead? although if it keeps crashing can u get into services menu?
im not great on the tech stuff but read IFA can be iffy and should only use as a last resort.
I wouldn't give up yet,keep trying,someone in the know will help u,takes time.Mines almost gone out the window loads of times and its very frustrating at the best of times

google dbox2 theres a online uk shop that will come up first probably ?90 odd but have a warranty or fleabay.de can pick up quite cheap

I used a crossover cable. I have just FTP the image but still crashing.

[walkman]

i would recommend flashing Blade Quad and trying different ucodes as in the above post. Try putting a booster on so you can reduce signal aswell as make it higher. See if thats work.

I will try Blade Quad and trying different ucodes. already have a booster on but I will try reducing the signal.

[walkman]

just thought,its a long shot.Is there a button stuck somewhere,remote or box.I had a crap remote and the d button kept getting stuck,when i pressed another button my box used to go haywire.

Remote is okay I even used a all in one remote to see if that helped but no luck.

Thanks everyone for the help.
I will try a few things today