I have made a complete arse of it...

[Celtictiger]

As the title suggests....so heres the back ground...I was asked by a mate to see if I could get his Nokia dbox working, had worked fine up till two weeks back, where it stopped rolling keys. So on boot up the all programs on all channels were listed, the EPG detailed what was showing on each channel etc. It was running on the Sportster image and emu was Evocamd.
I ftp'd to my puter and dropped the lastest nagraroms 7,10,11 and also camd_cfg.So then restart the emu...still keys did not roll.Tried one or two other setting tweaks...but still could not get up and running....sooooo...heres where I really ****ed things up.....I took chance and downloaded the latest Blade image...and following the guide to flash via telnet...i renamed the blade image, backup.img and ran the telnet install command....thennnn all seemed well...started to delete until 98% done...and then receive a error saying unable to complete.
So turn on and off the Dbox and now I can not even get bootup image...just a blue screen.
So this is a cry for help...is still completely useless and beyond revival ...or can I get this thing back up and running.
Any assistance would be appreciated........

[plasterer]

Download Image Flashing Assistant
Run that with a crossover cable mate
That should Fix it
If Not attatch a null mowdem as well
This should bring it back to life .....Paul

[johnlogie]

If u live near Glasgow and r really stuck and cant get it sorted give me a shout and i'll try and sort it for u m8

[Celtictiger]

Thanks for the feedback,
I have to borrow a PC laptop to do the suggested fix using IFA as I am stickly a MacAddict, which explains why I tried to attempt to flash using telnet in the first place.
So am I correct in thinking all I require is a crossover cable, IFA, and a working image.....oh and a PC. Run IFA ...it will recognise there is a Dbox connected....located the image i need to flash...and it should run away and fix things.

[chrispeters]

Thanks for the feedback,
I have to borrow a PC laptop to do the suggested fix using IFA as I am stickly a MacAddict, which explains why I tried to attempt to flash using telnet in the first place.
So am I correct in thinking all I require is a crossover cable, IFA, and a working image.....oh and a PC. Run IFA ...it will recognise there is a Dbox connected....located the image i need to flash...and it should run away and fix things.

That is how it supposed to work yes...although it took me loads and loads of tries to finally get it to work !!
#if you use a xover cable only it will take longer and you will not get any on screen info. It better if u use a xover AND a null modem cable, although it is not necessary.

[thebigman]

download the guide from here tells you all you need to know.

thebigman