Sagem Dbox2 Intelx2 Debug help needed

[psats]

Is point 22 the flash reset or the write protect?

Ta

you only need to ground that spot.

connect everything to pc start bootmanager then plug in box
get the numbers up then ground that spot.

[fmonkey27]

I got the box into debug mode, just followed the guide and grounded point 22 and now i get the dbug screen when the box boots up , just need to get it flashed with an image.

Any info on what is the best most stable image and can i just flash the box using the IFA?

Cheers for all your help guys, really appreciate

[Tommo1973]

I got the box into debug mode, just followed the guide and grounded point 22 and now i get the dbug screen when the box boots up , just need to get it flashed with an image.

Any info on what is the best most stable image and can i just flash the box using the IFA?

Cheers for all your help guys, really appreciate

Hi m8,

Use the portable ifa in downloads (only requires a crossover cable no null modem) and I highly recommend Commando 12 available in 1x and 2x formats in the download section.

Tommo

[psats]

any image you use will need the magic files adding.

nice to see you got it done.

[fmonkey27]

will portable ifa a go, starting to get into this now!

Cheers

[fmonkey27]

All finished, had to do it using the RS232 method, took a while but got there in the end. Thanks for all your help on this everyone.
Ta

[xbmc]

Hi all, just put in debug mode Dbox Nokia 2 X Intel B.Mon 1.2 , now trying next - Sagem 2 X Intel ... but after the:
Setenv product? 0

and reset nothing ... betaresearch again

trying same steps like on Nokia:

1. short cut to flash reset

testing whith - icache , - working ( is on )

2. disable whrite protect

3. entering Setenv product? 0

4. whait 4 sec ... and nothing..


i thing the problem is in B.man - version is 1.0

but i cand find info on dputing in debug mode sagem 2 X Intel whith b.man 100

actualy the digits are: 030010023 .....

I thing to go by the long way:

chorus 800000

after 'icache' but this may misamash flashs data ... or not?!

any help ?

[psats]

Hi all, just put in debug mode Dbox Nokia 2 X Intel B.Mon 1.2 , now trying next - Sagem 2 X Intel ... but after the:
Setenv product? 0

and reset nothing ... betaresearch again

trying same steps like on Nokia:

1. short cut to flash reset

testing whith - icache , - working ( is on )

2. disable whrite protect

3. entering Setenv product? 0

4. whait 4 sec ... and nothing..


i thing the problem is in B.man - version is 1.0

but i cand find info on dputing in debug mode sagem 2 X Intel whith b.man 100

actualy the digits are: 030010023 .....

I thing to go by the long way:

chorus 800000

after 'icache' but this may misamash flashs data ... or not?!

any help ?

you only short out one spot on a 2xintel. the spot is shown in post 14

http://www.digital-kaos.co.uk/forums/f35/sagem-dbox2-intelx2-debug-help-needed-86312/#post428732

then its icahe

setenv product? 0 {enter}