nokia dbox pacino3 image

[namatse]

Given this dbox have put the pacino image on and added my location - all went well but no channels. When I do a channel scan I get "waiting for time" - any ideas as to what I am doing wrong? If this is related to time i have noticed that the actual time and date on the dbox are incorrect but I cannot see how this can be changed.
Enjoying this challenge but need some help from those in the know.
Help please or point me in the right direction - much appreciated

[MetMan]

Given this dbox have put the pacino image on and added my location - all went well but no channels. When I do a channel scan I get "waiting for time" - any ideas as to what I am doing wrong? If this is related to time i have noticed that the actual time and date on the dbox are incorrect but I cannot see how this can be changed.
Enjoying this challenge but need some help from those in the know.
Help please or point me in the right direction - much appreciated

flash a later img plenty in downloads

[moin]

flash the lhc2 image it great easy to use

[Elric]

make sure you get the latest image and also the right one
for the box,if its a nokia it will be a 2x image,if its sagem it
could be 1x or 2x image

[namatse]

nokia dbox pacino3 image

Thanks for the help and advise. I will download the LHC2 image and let you know how it goes. Cheers

[namatse]

nokia dbox2

have tried both the LHC2 image and the lakys-sylas but neither has worked. Must be missing something simple I think?
On both occasions I have updated my location and done channel scans but keep getting the same messages "waiting for time" and error no channels
Any help would be appreciated

[scubar]

are you sure the cable feed is live?

[mickydibble]

Have you got a deffinate live feed?cable

[alom5]

Sorry to say, but it could be your area has gone to nag 3 and you wont be getting anything except fta channels...........like me.

[namatse]

nokia dbox2

thanks scubar and mickydibble but yes the feed is live.
alom5 not sure what nag3 is all about?

[namatse]

nokia dbox2

oh dear - have just done some reading about nag3.... doesn't sound good but that can't be the reason for my probelms as other local dbox users not reporting any problems

[Ianleo]

Hi mate waiting for time is usually done to the tuner put an rf cable from the tuner out to the tv and see if you can tune a channel that way to test the tuner

[namatse]

nokia dbox2

have checked cabling is good -
can you let me know which is a good image to put on this nokia dbox. I think I need to read through more of the guides on this site to understand more about the process but having a correct image would be good start.
I am in teesside so will also need to source services.xml for my area.

[mickydibble]

get the latest commando image 11.3/12 flash this..... then you need the correct files ie magic files and ftp these to the same named folders on box chmod the cams in var/emu save and then on box set location and scan....

but you should get fta channels before moving on,after img is installed if you have a live feed from vm then you should get fta channels if not it is a sygnal prob like already mentioned micky

[namatse]

nokia dbox2

don't quite know what I was doing wrong before but that doesn't matter now - followed your suggestion and instructions and dbox up and running. thanks for advice, and the knowledge. Great site, great help cheers