DBox2

[dchall]

Hi Guys im new to this site, my dbox2 has been sitting in a storage unit for over a year now and i need some advice on how/where to get the lastest image

[360gurufix]

from here mate..look up download section...commando 12....but you need the magic files from a site called mercs

[dchall]

Hi again, Sorry....I have flashed my dbox2 with the commando 12 software. I have run a service scan and it now says "Error No channels were found ! please execute a scan". Do i need to add these magic files you mention above? If so what is the full web address?....Thanks so much!

[360gurufix]

Mercs

Download them then look at the files titles and transfer to the matched up the tites...i.e var..etc.....using fxp program than after that you need to chmod a couple of files..i had the same problem..look at the thread that i started...just a couple below this

[PaphosAL]

Ahem!! WHY do we have two parallel threads, asking the same question, from the same user?

[dchall]

Hi Guys, i've download the fxp program however the guide does not tell me which locations i need to move the folder to on the dbox. I copied them to the tmp folder for now however can someone please tell me the correct locations. Sorry 2 b a pain!

[zyxro2003]

i have the same problem !

[360gurufix]

Hi Dchall
No problems

You would of downloaded 3 files
1.Lib
2.Var_Bin_Emu
3.Var_Keys

With your fxp program you will have the folders mentioned above in your left window and your Dbox 2 directory in your right.
In your dbox menu you will have a Lib folder open both folders in both windows and tranfer contents from left to right.
And Keep doing this to all contents of all the folders,but where there is no folders present in the right 1,transfer the whole folder over.
To transfer...highlight file/folder and right click,then select tranafer..
The 1st 2 folders i.e lib and var_bin_emu you need to chmod these files after you have transferred them,you do this by highlighting the files right click then select chmod and enable till you get 755 ..
Hope this helps
360

[cjjthedon]

google bigmaq toolbar , helped me out a lot to get to how to transfer files via ftp , and also images and tools and guides on there to help you out