Dbox2 Debugmode

[zyxro2003]

hello again guys !

I still have the same problem...with my dbox 2 sat !

I can't bring him in debug mode... i use the pin12 methode !
i have

• Null Modem Cable.
• Crossover Network Cable.
• Piece of wire about 1 foot long

My BMon 01dd120081 so 1,2
i have the boot manager with ppcboot file but i am not shure wich one is the right une because i have 2 kind of ppcboot file one is ppcboot_flash^202 KB (207.138 bytes)
and the other one ppcboot.tar.bz2 1,82 MB (1.913.642 bytes) anyway the single one who works somehow is ppcboot_flash^202 KB (207.138 bytes)... ok !
Irestart my box ... boot manager shows me that i have a connection ...ping is ok... i press power and up arrow to reset and the i release the power button until the version of Bmon appear and with the wire at the screw and pin 12 i make the connection... on the display betwen the numbers appears the 4 bloks..... and do nothing else ... remain like this ...
i try to tipe Icache in CMD terminal...and nothing
i send the command help on RSH-Client ...and i recieve! Couldn't connect to DBOX! (Timeout..?)



PLEASE HEELP ...!!!!!

[zyxro2003]

so nobody knows?

[Fergal]

Make sure you get the box to loop between 4-5 blocks then reset Continuously in the lcd

[smoggie]

what type of flash chips does the box have. intel or amd?

[zyxro2003]

i have intel....

[zyxro2003]

solved...... the problem was ppcboot file.... i have the wrong file...

THX anyway guys