DBOX2 Faulty Error?

[LDG]

Hello, think my dbox maybe broken now, as im not sure what is going on with it.

I tried to flash my box but it crashed so i had to basically unplug the box from the wall, i tried to load up the box as normal, now it WILL NOT load up at all onto any tv channels even freeview channels

On the LCD screen it starts up like all the codes/numbers, then the message Commando 12. powered by ukcvg.org u-boot 2009.08, every 30 mins to a hour it changes back to all codes/numbers, then that message appears again
any advice or help? cheers

[plasterer]

Sounds like a hardware fault
Connect a null modem cable and run boot manager
That will tell you were the fault ,if any lies ...........Paul

[LDG]

Sounds like a hardware fault
Connect a null modem cable and run boot manager
That will tell you were the fault ,if any lies ...........Paul

boot manager? like the FTP thing?
i run that, and sometimes it doesnt let the file transfer complete
any help?cheers

[Fergal]

If the box does not boot up fully flash it again using IFA try renny portable version.

[LDG]

If the box does not boot up fully flash it again using IFA try renny portable version.

Hello Fergal, thanks for that works a treat, once again thanks.

Just another subject now, my FTP will not transfer ANY files over to the box. YES everything connects up. The box and my laptop are set up to work with each other, ive tried a number of FTP clients. and they all do not let me transfer data over to the dbox.

cheers.

[father ted]

have you tried flash fxp?

[LDG]

have you tried flash fxp?

hello, just installed that

connects up box to laptop fine

cant transfer 'failed to transfer' ffs!

[Bulld0g]

Is your firewall off

[LDG]

Is your firewall off

its not off no, but its worked before mate.

[chris31560]

m8 some programms and images do require the fire walls to be turned off to work sucsessfully..

[MetMan]

its not off no, but its worked before mate.

try transfering a file to the /tmp folder, if that's ok and u cant transfer to other folders then ur img has gone read-only, if so reflash a new img

[LDG]

m8 some programms and images do require the fire walls to be turned off to work sucsessfully..

still not workin guys

[LDG]

all sorted now thank you. still not picking up any channels and im using a signal booster too hmm