has my box had it

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fergal
    V.I.P. Member
    • Aug 2008
    • 1007

    #31
    boot: elfcopy failed: 16
    means something is blocking the network
    antivirus,firewall, other networkcard,etc disable them all except the networkcard you are using.
    give the networkcard a static ip of 192.168.1.201
    subnet 255.255.255.0
    set it to 10baseT_halfduplex and try flashing it again
    also try rennys portable version of IFA.

    Comment

    • chris31560
      DK Veteran
      • Feb 2010
      • 912

      #32
      hi fergal i know how to do most of wot u said apart from how to do a static net work ip address, cheers...

      A LITTLE THANX GOES A LONG WAY


      Comment

      • Fergal
        V.I.P. Member
        • Aug 2008
        • 1007

        #33
        This will show you how to set your networkcard to 10baseT_halfduplex and give it a static ip
        Digital Kaos - Downloads - Guide for FlashFXP
        If doing that dont work you could try flashing it with the nullmodem cable only method here
        Digital Kaos - Downloads - How to Flash a Dbox with only a Serial Cable

        Comment

        • plasterer
          V.I.P. Member
          • Jun 2008
          • 1631

          #34
          Or Drag it up to ours and ile do it for you , Chris
          Thanx Fergal..............Paul
          If your Happy with the Help push the Thanx button
          PAUL

          Comment

          • chris31560
            DK Veteran
            • Feb 2010
            • 912

            #35
            cheers paul i think ill be ok now, just warnt sure about changeing network card ip but after fergal told me how to do it i remembered so hopefully ill be ok, cheers chris...

            A LITTLE THANX GOES A LONG WAY


            Comment

            • chris31560
              DK Veteran
              • Feb 2010
              • 912

              #36
              hi fergal tryed wot u said even put the ip addy in wot u said it aint movin m8, just wont flash any other ideas cheers chris.....

              A LITTLE THANX GOES A LONG WAY


              Comment

              • Fergal
                V.I.P. Member
                • Aug 2008
                • 1007

                #37
                Did you try flashing it will the nullmodem cable only method

                Comment

                • kenny_d
                  Newbie
                  • Jul 2008
                  • 1

                  #38
                  it happend to me today, and all i did was reflash my box, and its back on a running (for now)!

                  Comment

                  • dopes
                    Newbie
                    • Dec 2008
                    • 8

                    #39
                    chris the same thing happened to me have you changed your router?? i found that when i plug my new router up problems start as sson as i plug my old one in again get straight into the menu

                    Comment

                    • chris31560
                      DK Veteran
                      • Feb 2010
                      • 912

                      #40
                      re box had it

                      hi guys just an update to my dbox prob, box is all up an runnin now ide like to thank evryone who helped me sort it, and a special thanks go out to fergal and plasterer without ur input i feal the box would of gone in the bin thanks again, chris......

                      A LITTLE THANX GOES A LONG WAY


                      Comment

                      • KillerDog
                        Top Poster
                        • Oct 2008
                        • 188

                        #41
                        Can i bump this and ask for some help with my dbox2 nokia please. I only know its got a commando 11.2 (2) image on it. Just a shame to bin it really when it cud be used. Any advise appreciated, thanks guys.

                        Comment

                        Working...