Cabbaged box i think

[HIGH_MAINTENANCE]

hi all,

Tried to reflash my Dbox it currently has Blade on it when it starts to boot up it just cuts out and reboots again so i thought i would reflash it. Anybody know what the below means.

?debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.2, My IP This my ip number here
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.-.-; our IP address is 192.168.0.---
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.---
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.-; our IP address is 192.168.0.---
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.---
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####
done
Bytes transferred = 15684 (3d44 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.---
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################## ###############
################################################## ########
done
Bytes transferred = 626108 (98dbc hex)
Using SCC ETHERNET device
TFTP from server 192.168.0.-; our IP address is 192.168.0.---
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################## ###############
#################################################
done
Bytes transferred = 579075 (8d603 hex)
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626044 Bytes = 611.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 579011 Bytes = 565.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f21000, end 01fae5c3 ... OK
Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.0.202:192.168.0.2::::ff
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRG?ttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:b4:57
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.202, domain=, nis-domain=(none),
bootserver=192.168.0.2, rootserver=192.168.0.-, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1
NIP: 0fedce50 instruction: 7df802a6 opcode: 1f A: 18 B: 0 C: a code: 153 rc: 0
pte @ 0x fedce50: (0xc1fa80fc)->(0xc1f3db70)->0x01bc1889
RPN: 01bc1 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1
Kernel VA for NIP 0xc1bc1e50 pte @ 0xc1bc1e50: no pmd
Bad emulation init/1


Obviously i amaended the ip so its not that.

Any ideas, is my box dead now and just good as a paper weight.

Thanks in advance

[DiddyDave]

Make sure that the image is not broken from the download then make sure that you are flashing with the right version of the image

X1 or X2

As it does seem to be trying to flash your box

Sorry double post need to remove this one please

[DiddyDave]

Make sure that the image is not broken from the download then make sure that you are flashing with the right version of the image

X1 or X2 Dbox2 Chip

As it does seem to be trying to flash your box

[HIGH_MAINTENANCE]

its definatley a X2 i aint got a clue it begins to load and flash then just sticks, thanks for replying diddy