Bricked?

[kq501]

I've a eurovox blue.

I've succesfully managed to update firmware on 2 boxes (blue and red). This other one just stays on standby (red light).

I've looked around to try find a fix but at a loose end. Any help appreciated?

It's not a clone box.

[smirnoff_rules]

look here m8 http://www.digital-kaos.co.uk/forums...pacitor-23233/

[HiTeck]

Try as smirnoff_rules said above and if you still have no luck take the lid off the box, if it's genuine you will see a small black reset button, with the box turned off at the mains press and HOLD the reset button start the UFL and press download, press start when prompted wait 2 seconds turn the box on at the mains then release the reset button then the firmware should/hopefully start writing.

BE CAREFUL when turning the box on and holding the reset button down that you dont touch ANYTHING else inside the box. Electric shocks hurt (you could hold the reset button down with a pencil if your nervous)

It may take a few attempts but I have got a few going like this when the caps have been fine otherwise it's jtag time.

[kq501]

thanks guys for help. The c14 thingy is domed at the top. Are they easily replaced?