eurovox ex5100 pvr scrambled channels

[satsmo]

Read here http://www.digital-kaos.co.uk/forums...-eurovox-9786/ and assign your comm port as per the instructions in the link.

[nicho123]

i have done all that ...

i no am on com port 6, but the program only lets me pick ports 1 2 3 or 4, nothing higher.

[satsmo]

As said read the guide and select between comm ports 1 to 4 preferable on an unused port.

[camelv]

i have done all that ...

i no am on com port 6, but the program only lets me pick ports 1 2 3 or 4, nothing higher.

have you read this m8 http://www.digital-kaos.co.uk/forums...iting+response

[nicho123]

i have manged to fix it now, what i did was under device manger i changed what com port it was on and then i was able to get t working, thanks.

[funkysy]

hi on the ex1000sl which one of the firmware to use as there is two!!! and what the diffence
many thanks

[badapple]

m8 read through carefully, one has "auto sort" disabled and the other has "auto sort" enabled.
Download the one with auto sort enabled.

[funkysy]

thanks badapple i will

[funkysy]

If its new you will need to flash it, read through these,

http://www.digital-kaos.co.uk/forums/f71/guide-cables-required-flashing-eurovox-9786/

http://www.digital-kaos.co.uk/forums/f71/eurovox-receivers-firmware-9787/

http://www.digital-kaos.co.uk/forums/f71/guide-how-flash-eurovox-9790/

http://www.digital-kaos.co.uk/forums...settings-9789/

hi just got my new 5100 today, i assume that i need i to install it first before i start flashing it or can just flash staight out of the box's
many thanks in advance

[HiTeck]

Firmware for the 5100 is here >> Digital Kaos - Downloads - UFL_EX5100PVR_DarX_16-01-09

Thats all you need for your 5100 to pick up all your channels.

Follow the guides you just quoted.

[funkysy]

thanks for a quick reply. i have the firmware i just wanted to know do i set it up to the tv first or can i start flashing it as the unit is brand new

[HiTeck]

The majority don't sell them flashed, post the system info.

Plug the box into your TV via scart,

Press menu, config, system info and type back what it says in there.

[funkysy]

system info
model dvb-xc ex5100 tda
s/w ver 1.0 sta jan 06 2009
h/w 2.0t k5 +d
bootstrap v001
s/w buid kuro

[HiTeck]

Needs to be flashed, use the links I gave you above.

[funkysy]

thanks i will. if i get stuck later will let you know
many thanks