Hi, to all on forum this is my first post i hope all you knowledgeable people can help me.i have problem with ex 1000 sl checked on forum for solution there is a post last year no joy, The problem is dead box when switched on led flashes red for mili second
but nothing. I then left box on for about 15 minutes unplugged then re-plugged box fired up. Worked all night but in morning it was back to square one. I checked psu and found D2( looks like bridge rectifier )wasnt soldered into one side of print looked like manufacturing fault so fixed it still no joy.R2 is also taking a bit of current and C5 warm its a 33uf looks like smoothing cap. I dont have a circuit diagram .But do you have any knowledge of this fault or do you know where i can get a schematic or power supply.
would be much obliged, all the best Greenbones
but nothing. I then left box on for about 15 minutes unplugged then re-plugged box fired up. Worked all night but in morning it was back to square one. I checked psu and found D2( looks like bridge rectifier )wasnt soldered into one side of print looked like manufacturing fault so fixed it still no joy.R2 is also taking a bit of current and C5 warm its a 33uf looks like smoothing cap. I dont have a circuit diagram .But do you have any knowledge of this fault or do you know where i can get a schematic or power supply.
would be much obliged, all the best Greenbones