Eurovox EX5100

[Phil Smith]

Alright,

Just brought 2 of these from IWANTABOX.com.

Its states that i need to download the FTA software, but i cannot find it for the EX5100.

Can anyone help please?

Cheers

Phil

[Krypton]

here you go mate
Digital Kaos - Downloads - UFL_EX5100PVR_DarX_16-01-09

[Phil Smith]

Thanks ive tried it states that it is downloading and come back as successfull, but as soon as i plug in etc i get no channels come up on the TV screen

I was wondering if this is the FTA download

[Krypton]

you need to do a scan mate
menu>installation

[Phil Smith]

Many thanks up and running now.

Just one more question i also purchased a hard drive which i pushed in.

When i press the PVR button it comes up disk full or uninstalled.

Any idea what to do next?

Many thanks

Phil

[theGh0st]

Many thanks up and running now.

Just one more question i also purchased a hard drive which i pushed in.

When i press the PVR button it comes up disk full or uninstalled.

Any idea what to do next?

Many thanks

Phil

It does that by default when there is nothing recorded on the HDD, ignore the message and press the record button then it will work, you should have received instructions on the HDD install which tells you this.

I actually only got my 5100 today with software pre-installed, done a scan found over 250 channels and all is well, very happy.
The guys on here actually persuaded me to go for this one as I was going to get a Dreambox for the cable side of it, already have a DM7000 for the Sat side.

Regards.

[Phil Smith]

SOund as a pound thanks.

Just one more thing me EPG is a hour behind or ahead cannot figure it out.

Any idea how to change that

[buie31]

hi if you go into the main menu on the box goto config then go to time settings then time zone change to gmt o this should do it

[Phil Smith]

Thanks for all your help.

However when i press the pause, rewind, record buttons nothing happens,

Any idea?

Cheers

[theGh0st]

Hi m8, make sure that the HDD you put into the box has not got plastic bits on either of the ends.

Make sure it has all pins showing on the HDD.

What size (GB) HD have you installed into it?