handy tips

[nobby12]

too any new eurovox users if u ever loose any channels like sky 1 or looking for a ppv avent, make sure the prog is being transmitted go to menu, installation ,update channels,and off you go

[antsumner]

even quicker way is push info twice on the channel you have lost note down the frequency i.e 635.00 go to user installation (pin oooo) find the frequency push ok it will put a tick there then push the coloured button for manual scan. its a lot faster

[Gee]

even quicker way is push info twice on the channel you have lost note down the frequency i.e 635.00 go to user installation (pin oooo) find the frequency push ok it will put a tick there then push the coloured button for manual scan. its a lot faster

Will this work for channels that are jumping/skipping too?

[mtv1]

worth a try m8 , but jumping and skipping ie. digital tiling is due to weak signal check your feed no splitters try a booster.

[Gee]

Cool, thanks.

Quick question.

I have my splitter directly from the cable coming in to the home and then seperate cables going to the box and modem.

Is this correct?

[Barnsley Bill]

You may have to lose the splitter and just run one box to stop the pixelation...or a booster if ya want to run both boxes together...press info twice on the remote on the bad channels...ya lookin for 82-85 % for the euro to run at its best.

[mtv1]

put a booster where your cable is coming in use the booster as a splitter good luck

[Gee]

You may have to lose the splitter and just run one box to stop the pixelation...or a booster if ya want to run both boxes together...press info twice on the remote on the bad channels...ya lookin for 82-85 % for the euro to run at its best.

What do you mean by this?

I am running a splitter in order to run the EuroVox and cable modem in the same room.

It was subscribed for Broadband only, so never had an original cable box.

I do pay for a Virgin subscription, but this is downstairs.

EDIT:

put a booster where your cable is coming in use the booster as a splitter good luck

I may give this a try, thanks.

[Gee]

put a booster where your cable is coming in use the booster as a splitter good luck

Will this do?

[bjbj]

iam new, how do i upload new firmware?

i love this forum, can anyone help me setup my eurovox?

[mtv1]

ye m8 what do u need to know

[LeLongCarabine]

Will this do?

where did you get that from i keep searching for one but all that seems to come up is usa sites for them
cheers

[Gee]

Search for 'Cable signal booster' on Ebay mate.

[LeLongCarabine]

booster

ok guys got me a booster /amplifier fitted it to the cable and hey presto no signal had it conected to the wall direct from the cable then tried it from the splitter to the amp still no signal anyone any ideas tried to alter the gain switch but that only gave me a broken picture do i have to do a rescan when its conected but it doe's say nosignal or bad signal soon as i take it off the picture is perfect
over to you

[aftermath]

ok guys got me a booster /amplifier fitted it to the cable and hey presto no signal had it conected to the wall direct from the cable then tried it from the splitter to the amp still no signal anyone any ideas tried to alter the gain switch but that only gave me a broken picture do i have to do a rescan when its conected but it doe's say nosignal or bad signal soon as i take it off the picture is perfect
over to you

you might have too strong a signal, where you would need to add an attenuator ( think its spelt right ) I had to add a 3db one a few years back to get a clear pic.