"No signal" message???

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Bluecroft
    Newbie
    • May 2009
    • 9
    #1

    "No signal" message???

    [Was having problems with no transponders message.
    Thanks to guidance on here I reset and uploaded a Channel file.]

    All channels now loaded but none showing. Only the message "no signal" WHY???

    Have used another eurovox on same cable line and works fine/all channels available.

    Why can the other box not get a signal from same cable input???
    Tags: None
    • HiTeck
      V.I.P. Member
      • Oct 2008
      • 996
      #2
      Need more info, Where abouts are you, what symbol rate did you use, have you got the cable feed plugged in the RF socket and NOT the ANT socket at the back of the box, have you taken out splitters then tried a rescan, have you also tried a deep scan.

        Comment

        • Bluecroft
          Newbie
          • May 2009
          • 9
          #3
          Originally posted by HiTeck
          Need more info, Where abouts are you, what symbol rate did you use, have you got the cable feed plugged in the RF socket and NOT the ANT socket at the back of the box, have you taken out splitters then tried a rescan, have you also tried a deep scan.
          Glasgow mate.

          Tried everything above as you state. Odd thing is one box fine the other not getting signal. Both identical Erovoxmax V.

            Comment

            • mindcrime
              Member
              • Nov 2008
              • 63
              #4
              No signal" message???

              Neilcoll try updating firmware to latest and set 6.887 baud then fast install , don't upload channel file scan from fresh .

                Comment

                • smirnoff_rules
                  V.I.P. Member
                  • Mar 2008
                  • 8603
                  #5
                  u do have the cable in the top left hole looking at the back have u ? rf
                  any information provided is for educational/experimental purposes only.

                    Comment

                    • HiTeck
                      V.I.P. Member
                      • Oct 2008
                      • 996
                      #6
                      What file did you upload I presume a CDF. Are you sure you used the right one for your area if not they wont show, has it ever worked at your home and if yes did it start going wrong after flashing?.

                      You could try talking the CDF off the working box then uploading it to your problem box, if that doesnt fix it try the 8% signal fix firmware.

                        Comment

                        • Bluecroft
                          Newbie
                          • May 2009
                          • 9
                          #7
                          Originally posted by mindcrime
                          Neilcoll try updating firmware to latest and set 6.887 baud then fast install , don't upload channel file scan from fresh .
                          Have done this now mate and all channel are listed. But getting the updating code message. Left it for ages but no change. I am sure I am using wrong firmware. There are so many I am confused???

                          What is the very latest firmware for a EUROVOXmax V???

                          Would greatly appreciate an answer to this folks.

                            Comment

                            • smoggy
                              V.I.P. Member
                              • Apr 2009
                              • 12772
                              #8
                              use the firmware dated 30/11/08 Digital Kaos - Downloads - Eurovox Max V UFL Firmware (30/11/08)

                                Comment

                                • Bluecroft
                                  Newbie
                                  • May 2009
                                  • 9
                                  #9
                                  Smoggy you are a star

                                    Comment

                                    Previous template Next
                                    Working...