eurovox 1100

[lenordy]

how do iget in to the emu tryed the red button and code 2520 nothing doing can anybody help

[badapple]

Have u updated the box with the firmware?

[lincsat]

If you got it from me, that will work, if not, check with your supplier to see what firmware is on the box.

[jackass]

hi geting some bad reports to do with the 1100 r they ok and do yjey work i no its a new box but can u get firmwere and all that

[jackass]

they
sh*t typing

[jackass]

i c a lot off sites dont work now to do withs the euro

[lenordy]

yes i loaded it with your firmware its coming up scrambled

[badapple]

yes i loaded it with your firmware its coming up scrambled

M8, there is nothing wrong with the softwa*e, its been tested before it was uploaded. If there was fault with the softwa*e then it would effect ALL 1100 boxes and NOT just yours.
Usually it user error.

[lenordy]

can u tell me how to get to the codes

[maca]

can u tell me how to get to the codes

go here m8 BigMAQ Toolbar Download

[badapple]

yes i loaded it with your firmware its coming up scrambled

If the firmware is loaded proper and still channels scrambled,
try this go into language menu> red 2520 and enable emulator on Xcam and press green to save save.

[lenordy]

this is what ive tryd again. [upgrade by usb]
[upgrade file] ex1100usb
[upgrade mode] channel data
[start ] box says this is not a valid file am i doing somthing wrong

[lenordy]

have tryd red button 2520 in language get nothing

[badapple]

Try it like this m8,

Please make sure your usb pen drive is formatted to FAT32.

Downloaded the firmware from here>Digital Kaos - Downloads - EX1100USB_SEP01.abs, drag and drop it onto your usb pen drive. Then ensure your machine is powered down before plugging the pen drive in the usb slot, power up. Press>Menu>tools>Upgrade by USB, highlight the firmware file and press RED to flash and OK to confirm.
If pay channels are still scrambled, go into language menu, press red 2520 and enable emulator ON Xcam and green to save.
This option is only available if the new firmware is installed proper.

There is no need to change/unzip the file.

[lenordy]

i saved it to the usb pen is this ok