ex700 hd+

[funkyuk]

hello can any 1 help i have a ex700hd and a starview box super may b the snow not sure but lots of channels are pixelated bad on both boxs some are fine some so bad cant watch can any 1 help plz ???

[chic.]

Hi m8 remove any splitters and make sure all the connections are nice and tight if you need a splitter get a good one from maplin's

[funkyuk]

Hi m8 remove any splitters and make sure all the connections are nice and tight if you need a splitter get a good one from maplin's

HELLO AND THANKS i removed all splitters done reset the lot and still the same can this b the n3 thing ??

[chic.]

no if it was n3 you wouldnt see the channel , your signel is breaking up check the cable right back to the small white box , if that is ok go to user installation and check the signel strenth on all the freq's if 1 is to low( ie 80 ) then press add and change up by 200 (ie 236,000 to 236,200) then scan that freq this could take a while but it should work BUT CHECK THE CABLE FIRST

[rontwo]

rontwo

hi to all. great forum.

[chic.]

hi to all. great forum.

Hi welcome to the forum m8 there are alot of good people on here

[funkyuk]

no if it was n3 you wouldnt see the channel , your signel is breaking up check the cable right back to the small white box , if that is ok go to user installation and check the signel strenth on all the freq's if 1 is to low( ie 80 ) then press add and change up by 200 (ie 236,000 to 236,200) then scan that freq this could take a while but it should work BUT CHECK THE CABLE FIRST

thanks for the help m8 i took the splitter out for modem rescan all fine now cheers pal