Eurovox tx problems

[thekid888]

Hiya guys

I just purchased a Eurovox tx and have loaded the firmwire onto it but when i switch on the box it freezes up and the numbers 02 just stay on the front of the box.... Now i cannot even use the remote to get to the menu screen ..
Any ides ? Is there some sort of factory reset i can load? as i cannot get to the menu screen with the remote to do it?????????

[satsmo]

Happens with some TX after flash. The bootloader is corrupt, I have downloaded a file for you here Digital Kaos - Downloads - Eurovox TX (MMDS) CHLD Fix.

Follow these instructions:

You should download twice to revive boot file.

1) Turn off the STB.

2) Access STB Loader 1.1.exe.

3) Select Boot File only - > Press Browser and then select boot_e02.bin

4) Press “Execution “and then turn on the STB.

5) Wait until box automatically re-boots.

6) If successful download, LED Displays “boot -> 02 “ - > and then select “Download “ on the STBLoader 1.1.exe.

7) Press “Browser “and then EVX TX_20071210_v002.bin

8) Press “Execution “and Wait until box automatically re-boots.

9) If successful download, LED Displayed “boot -> 02 -> On “

The box is now ready to flash and will now need the EVX TX_H_071123.bin flash to it as normal.

You will get it here Digital Kaos - Downloads - Eurovox TX Firmware & Loader Updated

[thekid888]

Excellent ! your a legend i'll give that a go and i will let ya know how i get on....

Thanks again my friend

[thekid888]

Well hello again

I did what ya said and i had some success i can now getback to the menu screen and the software loaded to the box no problem. I have picked up 118 channels but they are all still scrambled bar 4 or 5.. Any more ideas i would appreciate it

[satsmo]

Could you post what it says in system info please. If you do a factory reset and rescan it should work once flashed correctly.

[cauliflower69]

This is very odd as I have the exact same problem. Did a reflash and now I can only use about five channels.

It also states that its 23 - 11 - 07 in the system info.

Very peculiar.

Any help on this would be greatly appreciated.

[cauliflower69]

Right I figured it out. Once you have it flashed do a factory reset.

Then power off box at back then power on. Then do a scan. Then leave on sky action it'll stay at 0 percent for ages then VOILA

So happy now

Hope this helps you.

[duntarvie2003]

i have tried to update my eurovox tx but keeps saying flash update failed have done as said with instructions any help would be most gratefull

[satsmo]

Are you using the correct cable/cables to flash with? Take a look here and also note comm port setting if using a USB adapter, http://www.digital-kaos.co.uk/forums...-eurovox-9786/

[frangre]

flash

9) If successful download, LED Displayed ?boot -> 02 -> On ?

The box is now ready to flash and will now need the EVX TX_H_071123.bin flash to it as normal.

You will get it here Digital Kaos - Downloads - Eurovox TX Firmware & Loader Updated[/quote]

is this the latest flash file? thanks

[HiTeck]

9) If successful download, LED Displayed ?boot -> 02 -> On ?

The box is now ready to flash and will now need the EVX TX_H_071123.bin flash to it as normal.

You will get it here Digital Kaos - Downloads - Eurovox TX Firmware & Loader Updated

is this the latest flash file? thanks

It was at the time of the post, its here now > Digital Kaos - Downloads - Fix for MMDS version of EuroVox

[RathcooleHot]

thanks hope this works but can't download the files until I post I think ??