If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Can someone explain (to a newby!) how I can get a signal from my eur-box on main tv to a second tv in another room. I realise I can only watch same channel. I have the blue box. Thank Thanks
One way is to use an old video if you have it. Take a scart lead from the box to the video - turn the video to AV channel - then connect your cable from the cable out on the back of the video to your other TV, and tune it in. The video acts as a modulator.
Another way is to use a video sender, (you can get them in the likes of Argos). Others have used them with success, whereas some have complained of sound issues.
I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams
I tried the video but I get an awful lot of interference on picture. Looked at the video senders but don't know where to connect on box. Would you just connect it to the other scart socket.
Depends on the model of video and the cable used. Regards the digisender, yes you can use the available scart sockets if you like. Take a look here eBay.ie Guides - VIDEO SENDERS, INFORMATION GUIDE
I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams
Ive got a eurovox 5000 downstairs,,,,,,,,,,,,,,,,,,, nice kit
I bought a digisender from Argos http://www.argos.co.uk/static/Product/partNumber/5348066/Trail/searchtext>DIGISENDER.htm
The av signal is very good but I cant get the remote to work.
I got the wife to keep pressing channels whilst I moved the transmitter downstairs to see if it was a positioning thing. Every now and again the channel would change on the second tv but if I left the transmitter there it wouldnt change again. Any advise appreciated please?
Comment