Remote Control Stop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Luckjockey
    Member
    • Jun 2008
    • 56

    #1

    Remote Control Stop

    Hi, I have a Eorovox max V and the remote has just stopped working for no apparent reason. Never dropped it, I was using it then it stopped. Any ideas? I will order another but, in the meantime, how can I access the favorites etc? Thanks in advance.
  • thered
    V.I.P. Member
    • Aug 2008
    • 4915

    #2
    are you sure its ~~~~ed m8 cos i remember before one of the buttons had gotten jammed it was stuck and none of the other buttons would work till i released it

    Comment

    • Luckjockey
      Member
      • Jun 2008
      • 56

      #3
      Buttons ok. Have noticed on the front of the box that there is a green light next to 'lock', is this normal? Never noticed it before. Thanks

      Comment

      • satsmo
        V.I.P. Member
        • Jun 2008
        • 6397

        #4
        Yes green button signifies you have a channel lock. Without the obvious question of have you checked your batteries.

        If you have a mobile phone with camera, switch it to camera mode. Point the remote at the camera lens, and you should see the infra-red LED flashing on the screen. If you don't see it flashing, then yes, the remote is dead.

        If you do see it flashing, then it's not the remote. It could be a loose connection inside the box going to the RF receiver, or it could be a dry solder joint on the RF receiver legs.
        I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

        Comment

        • Luckjockey
          Member
          • Jun 2008
          • 56

          #5
          Have checked the batteries, thanks anyway. It's the remote, tried your little test and bingo! That's the cats nuts. Thanks mate.

          Comment

          Working...