If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi, I have a Eorovox max V and the remote has just stopped working for no apparent reason. Never dropped it, I was using it then it stopped. Any ideas? I will order another but, in the meantime, how can I access the favorites etc? Thanks in advance.
are you sure its ~~~~ed m8 cos i remember before one of the buttons had gotten jammed it was stuck and none of the other buttons would work till i released it
Yes green button signifies you have a channel lock. Without the obvious question of have you checked your batteries.
If you have a mobile phone with camera, switch it to camera mode. Point the remote at the camera lens, and you should see the infra-red LED flashing on the screen. If you don't see it flashing, then yes, the remote is dead.
If you do see it flashing, then it's not the remote. It could be a loose connection inside the box going to the RF receiver, or it could be a dry solder joint on the RF receiver legs.
I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams
Comment