box frozen

[khan1170]

wat do i do i flashed tho box watched it for a day or so then it froze ,wat do i do

[bugaloo41]

unplug it for a start and let it reboot.

are you getting ony fta channels?

[khan1170]

fozen help please need advice

i flashed bpx euro max 2006 model , it worked 4 a few day and a half then it forze , i unpluged it then put pwr bak on and it wont show on tv all conections r right , display on box cums on , plaese advise me wat to do..
no channels on cumin on

[mjamil]

same to me nothing happing on tv screen only 0000 on eurovox front please help us

[clit-eastwood]

it wont show on all tv connections????????????

[clit-eastwood]

i flashed bpx euro max 2006 model , it worked 4 a few day and a half then it forze , i unpluged it then put pwr bak on and it wont show on tv all conections r right , display on box cums on , plaese advise me wat to do..
no channels on cumin on

please explain

[khan1170]

fozen box

well i flashed it a few days ago m, then sudenyl froze on 1 channel, unpluged it then tried it again and now box cums on but no display on tv srreen , the box display cums on but wen i try 2 go up or dwn wid channels no luk it wont wrk , please help advise me :stickyman
wat i mean wen i try remote wid channals it wont bugde but i can turnpwr on and off

[khan1170]

wat it reboot

i am a newbie wat do u mean by reboot, yes i no not all there

[clit-eastwood]

well i flashed it a few days ago m, then sudenyl froze on 1 channel, unpluged it then tried it again and now box cums on but no display on tv srreen , the box display cums on but wen i try 2 go up or dwn wid channels no luk it wont wrk , please help advise me

check your scart is secure,(both ends) you would be surprised at how many people have this problem.....i went on a service callout to a customer that couldnt get any pic but got sound, and another that got sound but no pic......it was just a case of pushing the scart lead in PROPERLY

[clit-eastwood]

i am a newbie wat do u mean by reboot, yes i no not all there

take the plug out (no, not the bath plug) and put it back in again, if you are still having problems you need to read some more on here as you may have done the whole thing wrong. good luck

[hata0]

well i flashed my box..... last week (fri) , had a power cut last, then when it came back on the box turned on with the channels showing for a few seconds and then froze.. i cannot do anything to the box.... jus a black screen with some funny code being displayed on the box (cf7d for anyone that knows)

if anyone knows what to do please help

thanks

[camelv]

CLONE BOX RESET

BEFORE YOU DO THIS FLASH WITH F/WARE FROM APRIL 08 heres what u do take out the scart lead form ur eurovox and tv

connect a coxial cable from the back of ur eurovox to ur tv (a coxial cable is the one u use to connect ur vcr to ur tv )
ok now u have ur eurovox connected to the tv by coxial cable only have ur eurovox on and not in standby but on

now using ur tv remote scan the channels on ur tv do an automatic scan of channels on ur tv u should get to a screen asking for a code the code using ur eurovox remote now is either 0000 or master code 1004
now u will press menu>goto config>cleardata>clear channels>factory default ?choose corrwect symbol rate
YOU WILL JUST HAVE TO PUT KEY CODES IN UNTIL CLONE F/WARE IS RELEASED

once that is done all u do is take out the coxial cable and now ur scart is back on and working

[hata0]

i use scart to connect my vcr n tv... i cannot see where to put the coxial cable into my tv :S

[mjamil]

same to me frozen turnoff and back on its works but no works when you change channel

[williamd83]

does any body know the codes foe glasgow