Sly hd channels not working

[seamouse]

also when you press the audio button, check is not on NAR

[flyingpig]

Yes, press the audio button on the remote then audio sync. You can then move it forward or delay it further.

[mickr]

Thanks for that, tryed in other slot and it works. So I have modifed config file as above and now works in both. Have noticed some speech out of sync on hd channels anything I can do about this

With thanks

Mickr

[flyingpig]

I use CCCam and Sky HD,,,, you need to check that your boxkey is set correct. In the ET9200 you have 2 card readers and need to set the boxkey and frequency correct for both readers. CCcam will read the SD chanels without the boxkey, but not the HD. You will find that cccam wont clear Pick TV and Boxnation.

BOXKEY:/dev/sci0 01 01 01 01 (sub for your own)
BOXKEY:/dev/sci1 01 01 01 01 (sub for your own)
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3570000
SMARTCARD CLOCK FREQUENCY: /dev/sci1 3570000

Edit --- I think it's okay to post this, but if not please delete.....

[digicon]

Its my own card and they work in sky box

Mickr

Your better using Oscam for clearing the HD channels its more reliable than CCcam

[Pepik71]

I have same problem.

[mickr]

Its my own card and they work in sky box

Mickr

[cactikid]

check with supplier he does hd,and not just sd.

[mickr]

Have set up cccam with box key for sly on xtrend et9200, all sd channels work ok but does not open hd channels , Any ideas anyone

with thanks

mickr