quesion about a Programmer
Collapse
X
-
quesion about a Programmer
Last edited by Salami; 24 May, 2008, 20:56.If you like my post pleas click on the little button to say thank you. -
Thats no 7085 on that board, wrong casing. It's probably a 9v circuit looking at it (whats the number on that small transistor near the power input?) I reckon you'll be safe using a 9v power supply with a small current rating, I.e. around 200-350ma would me more than sufficient to drive that circuit.Comment
-
Is really hard o read the writing on the 3 legged transistor but I managedit it says: ~17AH - LW78L - 05ACZ.Thats no 7085 on that board, wrong casing. It's probably a 9v circuit looking at it (whats the number on that small transistor near the power input?) I reckon you'll be safe using a 9v power supply with a small current rating, I.e. around 200-350ma would me more than sufficient to drive that circuit.
After the identification of the voltage I need go and find the software for it in the internet.
I appreciate your help
<--Salami added 2 Minutes and 58 Seconds later...-->
thank you for your help as you can see above the reading of the transistor..
<--Salami added 5 Minutes and 28 Seconds later...-->
I also have Millenium 2001 and I don't know where to get software for it, if only can get software for either I will be able to use it. both are 9 pin serial connections.If you like my post pleas click on the little button to say thank you.Comment
-
Please Please Help.
I am *@@##off with the two programmer now I have bought a usb digitech and I can't get a driver for it, if any1 of you guys got one can you help and email me a copy I will sincerely appreciate itLast edited by Salami; 3 June, 2008, 12:39.If you like my post pleas click on the little button to say thank you.Comment


Comment