COBRA1423 IMAGE VER:00.5 IS RELEASED NEW NEW NEW!!!!!

[stuball2]

Not working here either, stuck on the earth too - flicking red light, tried flashing twice through the web page. Can telnet onto the box as root and top shows nothing doing.

/var/log message appears to ok for a while and then loops with this every few minutes:

Jan 1 00:37:06 dm800 user.info kernel: [ 1926.137000] bcmfb: enable manual blit
Jan 1 00:37:06 dm800 user.warn kernel: [ 1926.410000] alps_bsbe2 is in normal mode now
Jan 1 00:37:06 dm800 user.warn kernel: [ 1926.436000] alps_bsbe2 is in powersave mode now
Jan 1 00:37:06 dm800 user.warn kernel: [ 1926.454000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
Jan 1 00:37:06 dm800 user.warn kernel: [ 1926.454000] set current avs auto aspect to 16:9
Jan 1 00:37:06 dm800 user.warn kernel: [ 1926.454000] disable wss on display 0
Jan 1 00:37:06 dm800 user.warn kernel: [ 1926.455000] disable wss on display 1
Jan 1 00:37:06 dm800 user.warn kernel: [ 1926.455000] set sb to 3(1)
Jan 1 00:37:07 dm800 user.warn kernel: [ 1927.424000] 4905 ms: 100
Jan 1 00:37:07 dm800 user.warn kernel: [ 1927.442000] 18 ms: 1
Jan 1 00:37:07 dm800 user.warn kernel: [ 1927.510000] 68 ms: 6
Jan 1 00:37:07 dm800 user.warn kernel: [ 1927.556000] 45 ms: 20
Jan 1 00:37:07 dm800 user.warn kernel: [ 1927.880000] 324 ms: 30
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.225000] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.226000] set current avs auto aspect to 16:9
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.226000] disable wss on display 0
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.226000] disable wss on display 1
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.226000] set sb to 3(1)
Jan 1 00:37:08 dm800 user.info kernel: [ 1928.389000] bcmfb: disable manual blit
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.590000] VIDEO0: set blank to 0
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.628000] sync is off so we enable it
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.628000] playback!
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.628000] total video delay: 0 (0 ms)
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.638000] VIDEO0: start decode
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.649000] flush video decoder
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.855000] VIDEO0: first pts 0x0
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.909000] VIDEO0: set blank to 0
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.910000] VIDEO0: stop decode
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.911000] VIDEO0: set blank to 0
Jan 1 00:37:08 dm800 user.warn kernel: [ 1928.912000] no decoder left in sync handling so disable xpt_sync
Jan 1 00:37:11 dm800 user.err kernel: [ 1931.487000] bcm_accel: invalid opcode! 00000080

[MW35]

Not working here either just hangs on the Earth screen

[andiewill]

I can not get this image to install.
I'm using sim 2.0.1 and tried to install via browser
I have the correct bootloader
It just hangs with the earth picture and flashing red light on dreambox.
Waited about 20 mins and still the same
If i try version 00.4b it works perfect.
Am i missing something or any tips to try, Is it worth trying usb install

Yep i would try the usb install, it works good for me.......

[tidsfm]

Hi all

I can not get this image to install.
I'm using sim 2.0.1 and tried to install via browser
I have the correct bootloader
It just hangs with the earth picture and flashing red light on dreambox.
Waited about 20 mins and still the same
If i try version 00.4b it works perfect.
Am i missing something or any tips to try, Is it worth trying usb install

[digicon]

The Image can be Downloaded from here:

https://onedrive.live.com/?cid=48e1ab905262688d&id=48E1AB905262688D%21109

Please do not post links to other forums with a similar content, it takes a minute or two to actually upload to a file sharing site that everyone can use

Thank you

[cobra1423]

[QUOTE=MW35;2500036]where can i find the image? thanks[
COBRA1423 IMAGE DOWNLOAD HERE------> http://1drv.ms/1vtnxus

[MW35]

where can i find the image? thanks

[dannyboy]

Is it simple to do and does it usualy take ages for the image to boot up ? Cheers daniel

[cobra1423]

Mate I flashed my dreambox with it but I had to flssh it back as it wouldent boot and kept loading the bootloader then stop then flash again
My box always was a lazy starter
Ive got another dreambox 800 with a ferrari sim is it just a matter of taken the sim card out and changing it and then flash it again
I think my board is on its way out
Thanks in advance daniel

hi it's for sim2.0.1 &2.10 yes you can change your sim
Cobra1423

[dannyboy]

Mate I flashed my dreambox with it but I had to flssh it back as it wouldent boot and kept loading the bootloader then stop then flash again
My box always was a lazy starter
Ive got another dreambox 800 with a ferrari sim is it just a matter of taken the sim card out and changing it and then flash it again
I think my board is on its way out
Thanks in advance daniel

[miau18]

hi cobra its possible to get zap mode in black screen?when change channel it keeps picture in last channel?thanks

[cobra1423]

it works!!but takes lots of time booting when we restart the enigma!!!

Hi it's set to check the epg that's why it takes a bit longer you can switch it off by going into crossepg configure settinngs and select force epg reload on boot and set it to no. That will make it boot faster hope that helps you out.
Cheers cobra1423

[miau18]

it works!!but takes lots of time booting when we restart the enigma!!!

[cobra1423]

HI EVERYONE OK NEW IMAGE V.005 IS OUT REMEMBER AND READ THE GUIDE SO HERE WE GO ITS IN THE DOWNLOADS AREA ENJOY
COBRA1423 IMAGE DOWNLOAD HERE--------> ................................................

ps. I have tried it on sim2.0.1 BUT NOT sim2.10 please let me know if it installs ok.