Backup of Apollo 022 28/09/2014 Cloud ibox 2+ safe
EDIT. Updated this image again as some new will stick on boot. I f this is happening to you this should fix. Also updated and added settings into Tsmedia 9.1.
You may need to flash the 29/05/14 bootloader 1st. Newer boxs/updated boxs may have the newer kernel 05/08/14 bootloader already run. If when u press:
Menu
Information
About
it says kernel 3.6.0, then its ok. If it says 3.12 you would need to go back and flash 29/05/14 bootloader or choose a different image to this.
( If you have 2 usbs even better but not necessary. Ones going to live in the box permanently. Minimum 4gb for streaming to work correctly. Much easier. If you have run the 29/5/14 Bootloader or have a new box you will need to rename folder xpeedlx to cloudix.)
so first use ur fat32 formatted standard usb to put the xpeedlx (or cloudix) folder on.
turn off box
insert flash usb in rear
boot up. Box should take 3-15 minutes to flash and MAY say done on front when flashed. occasionally when flashing the front panel may remain blank, just give it 15 minutes in case. IT MAY STILL BE FLASHING.
turn off box and remove usb
now before rebooting insert ur pre-initialised usb
or follow paragraph on right below. if using same usb as flash MAKE SURE AND DELETE FLASH FILE OFF BEFORE INSERTING AND REBOOTING.
Menu
Setup
Vix
Mount manager (make sure mount is to hdd and format ext4)
Menu
Setup
Vix
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
(Just change region to your local and add ur u now what
auto bouqets setup
cross epg setup to hdd
service scanning set to SD
256mb swapfile setup
Added SkySkin;-)
Includes softcams, BackupSuite, mediaportal, ondemand, tsmedia, tspanel, vlcplayer, dreamexplorer,DLNA Server&Browser, Merlin Music Player&iDream, Movie Browser, OpenWebif, Picture player, SHOUTcast, Media scanner.
Also EXTENSIVE work done by dumbguy on the proxy/online side of things. And more. He's done a damn good and thorough job of making most streams work well. but i always choose to download anyway so theres no chance of them droppin out. But massive respect to him on the effort and permission to post!!
Click the download link above
If you like, or dont, please rate the download ;-) Thanks
Im not recommending. Just informing.
11/08/2014 statement from airsatddt
" NEWER BOOTLOADER AND KERNEL 3.12 RELEASED
We have released newer bootloader and newer kernel 3.12 from August 5,
pls check at our software website: cloud-iboxdotnet
The install Step:
1, pls find the bootlaoder in 5th August, update bootloader first,
2, after install the newer booloader, and then install the new image with
newer kernel and driver. otherwise you can not instll the lastest image
without the new bootlaoder,
hi guys file in download section
EDIT. Updated this image again as some new will stick on boot. I f this is happening to you this should fix. Also updated and added settings into Tsmedia 9.1.
You may need to flash the 29/05/14 bootloader 1st. Newer boxs/updated boxs may have the newer kernel 05/08/14 bootloader already run. If when u press:
Menu
Information
About
it says kernel 3.6.0, then its ok. If it says 3.12 you would need to go back and flash 29/05/14 bootloader or choose a different image to this.
( If you have 2 usbs even better but not necessary. Ones going to live in the box permanently. Minimum 4gb for streaming to work correctly. Much easier. If you have run the 29/5/14 Bootloader or have a new box you will need to rename folder xpeedlx to cloudix.)
so first use ur fat32 formatted standard usb to put the xpeedlx (or cloudix) folder on.
turn off box
insert flash usb in rear
boot up. Box should take 3-15 minutes to flash and MAY say done on front when flashed. occasionally when flashing the front panel may remain blank, just give it 15 minutes in case. IT MAY STILL BE FLASHING.
turn off box and remove usb
now before rebooting insert ur pre-initialised usb
or follow paragraph on right below. if using same usb as flash MAKE SURE AND DELETE FLASH FILE OFF BEFORE INSERTING AND REBOOTING.
1st to INITIALISE YOUR USB AFTER FLASH (make sure xpeedlx folder is not on usb)
Insert usb in back
Turn on
Menu
Setup
System
Storage devices
Initialisation (select ur usb/hdd)
Initialise with red button
Now CheckInsert usb in back
Turn on
Menu
Setup
System
Storage devices
Initialisation (select ur usb/hdd)
Initialise with red button
Menu
Setup
Vix
Mount manager (make sure mount is to hdd and format ext4)
Menu
Setup
Vix
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
(Just change region to your local and add ur u now what
auto bouqets setup
cross epg setup to hdd
service scanning set to SD
256mb swapfile setup
Added SkySkin;-)
Includes softcams, BackupSuite, mediaportal, ondemand, tsmedia, tspanel, vlcplayer, dreamexplorer,DLNA Server&Browser, Merlin Music Player&iDream, Movie Browser, OpenWebif, Picture player, SHOUTcast, Media scanner.
Also EXTENSIVE work done by dumbguy on the proxy/online side of things. And more. He's done a damn good and thorough job of making most streams work well. but i always choose to download anyway so theres no chance of them droppin out. But massive respect to him on the effort and permission to post!!
Click the download link above
If you like, or dont, please rate the download ;-) Thanks
Im not recommending. Just informing.
11/08/2014 statement from airsatddt
" NEWER BOOTLOADER AND KERNEL 3.12 RELEASED
We have released newer bootloader and newer kernel 3.12 from August 5,
pls check at our software website: cloud-iboxdotnet
The install Step:
1, pls find the bootlaoder in 5th August, update bootloader first,
2, after install the newer booloader, and then install the new image with
newer kernel and driver. otherwise you can not instll the lastest image
without the new bootlaoder,
hi guys file in download section