dm800 flash problem

[yoyo]

ok so i got a dm800 from dreamboxcom.com. they said it was an original so i flashed pli-enigma2-jade3-dm800-20091005-6705.nfi via the web interface.

rebooted the box and got the "erro1 no ca found"

ive now tried every way to reflash the box.

when using dreamup i et the inital error of "invalid integer..."
then i use enforcer to try flash the bootloader but get the "file to big" error.

when i use hyperterm to com1 i get this msg

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #75 (20091005)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,0000 0133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND


do i have a clone dreambox and is their anything else i can do?

[kevin64]

pick what image you want from here Digital Kaos - Downloads - 2.1 clone images for bootloader 75




i think you have a clone m8 not a orignall CA MEANS BOOT LOADER WRONG ok you can usel orignal image only in the muilt boot not in the flash on a clone try a image from the link you want used dream up and null moden cable

[dctyper]

deffo not original for the price.

[kaitum]

If you plan to run multiboot so put a img with the latest drivers on the flash. The box are using flash memory drivers also in multiboot. Becomes problems quickly if you have old drivers in flash

[yoyo]

If you plan to run multiboot so put a img with the latest drivers on the flash. The box are using flash memory drivers also in multiboot. Becomes problems quickly if you have old drivers in flash

problem is i cant flash anything onto the box

[westkill]

i had a similar problem with a clone a while back i think
i had to use dreamup version 1-3-3-2
and flash nabilosat v0.10 with bootloader 72
which is in the downloads
or bootloader72
not 100% thou

[asmsanchez8]

i have the same problem

[deffc0n]

For all this problem please read my post this link:

http://www.digital-kaos.co.uk/forums/f39/dm8000hd-after-flashing-error-err01-no-ca-found-148229/

[poci76]

hi. i have a clone and not working. is black view.the flash in the right is on but don't work. please help

[deffc0n]

You have connect box with Dreamup ?

[crnair]

If the dreamup is not working you may need a patched Dreamup like DreamUP_patched_by_forhike_and_natas hiope it will help you

[adinitu]

i have the same problem.i try to put another image and now it show only "DREAM MULTIMEDIA",and don't start.

[adinitu]

ok.solve the problem.put sec. stage 7.20,then 4.50 for dm800 clone and work now.

[MyB5]

ok so i got a dm800 from dreamboxcom.com. they said it was an original so i flashed pli-enigma2-jade3-dm800-20091005-6705.nfi via the web interface.

rebooted the box and got the "erro1 no ca found"

ive now tried every way to reflash the box.

when using dreamup i et the inital error of "invalid integer..."
then i use enforcer to try flash the bootloader but get the "file to big" error.

when i use hyperterm to com1 i get this msg

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #75 (20091005)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,0000 0133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND


do i have a clone dreambox and is their anything else i can do?

How do I do this?

I can't connect with any DreamUP. Not even through "2nd_stage_pack". I only get "calculating checksum" or "waiting for acknowledge". Is my motherboard bricked?
Plz help!

[Net Babu]

err to big file in dreamup