Hi,
Had a motorised dish fitted recently. Got a DM800 clone with DreamElite Black Hole V1.33d (i think) flashed on it.
Installer went into setup/tuner config and configured a number of sat positions. He left me with 6 or so, 0.8w, 16.0E, 19.2E, 28.2E etc. SNR is very high, picture is good. Flicking between these different sats is not a problem.
I'd thought I try adding a few more, in the region of 28.2E, 26E and others. Used the same setting as the other saved positions. Added my long and lat in there as well, roughly 2.26W and 53.5N.
However when selecting the satellites either from the bouquets or testing using the satfinder tool the dish sends the motor west, way west, prob 30W.
Is this a motor/install issue? Or a s/w image configuration issue - I could well be doing something wrong.
Any help would be appreciated.
Had a motorised dish fitted recently. Got a DM800 clone with DreamElite Black Hole V1.33d (i think) flashed on it.
Installer went into setup/tuner config and configured a number of sat positions. He left me with 6 or so, 0.8w, 16.0E, 19.2E, 28.2E etc. SNR is very high, picture is good. Flicking between these different sats is not a problem.
I'd thought I try adding a few more, in the region of 28.2E, 26E and others. Used the same setting as the other saved positions. Added my long and lat in there as well, roughly 2.26W and 53.5N.
However when selecting the satellites either from the bouquets or testing using the satfinder tool the dish sends the motor west, way west, prob 30W.
Is this a motor/install issue? Or a s/w image configuration issue - I could well be doing something wrong.
Any help would be appreciated.