TECHNOMATE TM 600 PROBLEM

[tomsta79]

ok lads having a problem with my technomate tm 600 ..with the picture going blockie and breaking up ive got sub channels what i pay for the bloke has 2 cards with 2 servers running with 50 people off them and he says there boxs are fine.. my dish is just a normal sky dish but it is new ..just dont no what the problem could be! and i have( virgin with good speeds) any idears what it could be thanks

[mdt]

ok lads having a problem with my technomate tm 600 ..with the picture going blockie and breaking up ive got sub channels what i pay for the bloke has 2 cards with 2 servers running with 50 people off them and he says there boxs are fine.. my dish is just a normal sky dish but it is new ..just dont no what the problem could be! and i have( virgin with good speeds) any idears what it could be thanks

check your fta channels (bbc/itv/c4/c5/ect) and if these are breaking up then its probably a dish alignment issue... if your fta channels are ok then you could ask your friend to issue you with a new sea lion to see if the problem persists. regards mdt

[halfman halflager]

check the ecms when the picture goes blocky and breaks up for a certain sub need to be under 500 to gaurantee smoothness pretty sure you can download ecm checker from plugin in ur image .
you could also try another test sealion to compare as depending on how its run some say with cccam 15 to 20 peers max per card if using newcamnd/mgcamnd can be higher then this and can take higher ecms before breaking up but his 50 clients could easily be 150 they will all say everyone else is fine its the nature of the gready beast and unfortunately will slowly kill this side of the hoby