TM5402 cccam help

[karackers]

Hi all ,

Hope you can help , got two clines in my TM5402 first line connects ok no problems , second line will not connect same as any more clines i enter .

if i put these lines in my spiderbox 9000 they connect no problem ?.

its realy doing my head in as to why only 1 line will connect in my Tm5402.

Thanks

[thijs]

all lines should connect if you put them in correctly
there is space for 24 and they all should connect
make sure the protocol is right cccam for cccam newcamd for any other form of line and reset your router and tm after entering them

[karackers]

all lines should connect if you put them in correctly
there is space for 24 and they all should connect
make sure the protocol is right cccam for cccam newcamd for any other form of line and reset your router and tm after entering them

Thanks for the reply , this is my problem they should connect as they are in correctly , as i say in my post they connect on the spider box no problems , but the TM5402 only the first line will connect , all put in corectly in cccam.

thanks

[dgkhf]

Have you tried to swap the two lines round to see if the one that was not connecting is connecting now.

[thijs]

did you load your patches by correct procedure
1)back up channel list
2)factory reset
3)load original technomate firmware (can be got from technomate.uk download section)
4)factory reset
5)load latest patch (after this you could load latest addon but if you did before it will still be there)
6)factory reset
7)put back channellist and rescan all channels in use
If you don't use this procedure you could get bugs/problems on your tm that could result in no connections
Try this and let us know if it sorted it

[karackers]

did you load your patches by correct procedure
1)back up channel list
2)factory reset
3)load original technomate firmware (can be got from technomate.uk download section)
4)factory reset
5)load latest patch (after this you could load latest addon but if you did before it will still be there)
6)factory reset
7)put back channellist and rescan all channels in use
If you don't use this procedure you could get bugs/problems on your tm that could result in no connections
Try this and let us know if it sorted it

Thanks , i have only had the box for a week , bloke in the shop loaded all the patches etc into the box , i am presuming he did it correctly .

i will do as you have suggested when i have time and let you know how i get on , i will get another cline to test first .

Thanks