help with bulsat sofrcam

[redstealth01]

using the latest patch and sofrtcam on my 5300d+super
getting chans clearing on 19east but bul sat still scrambled
any ideas please

[thijs]

did you rescan Hellas39east some transponders changed http://www.lyngsat.com/packages/bulsatcom.html
irdeto2 only

[redstealth01]

yes m8 ive rescaned transponders are the same as the link you gave me any other ideas

[thijs]

are you sure you have latest softcam try this one and leave it on a channel for a bit sometimes it takes a while to clear

[redstealth01]

ill give it a go cheers

[thijs]

what patch are you using i think 153 is the latest

[redstealth01]

yes 153 patch phanto

[redstealth01]

the last patch before that was i think 141 and never had a problem

[thijs]

should work fine unless keys are down i have no 39east to test
i saw nobody else with bulsat down yet on any forum
nutsandbolts would know

[redstealth01]

its not the keys i tkink its the patch
do you have any older ones that are tried and trusted

[Nutsandbolts]

HI. i THINK PATCH 153 IS FOR tm5400 super plus. Also check in CAS menu if keys are correct. If keys look ok then you may have a patch problem or signal problem ie check signal strength for channels. Regards.

[redstealth01]

signal is at 96% patch said for tm5300 super

[thijs]

if you tried the softcam i gave you and this does not work you can try 152 from here Download center but 153 works for most 5000super series users

[redstealth01]

thanks ill try that
will let you know

[redstealth01]

ive checked and the one im using was 152 ive not got 153 but ive just tried 137 and still get nothing
where do i get 153 from