Wanted-TM5302 Channel list

[Manic01]

For 28.2e please if possible.
Thanks.

[Nutsandbolts]

Hi. Why not do a blind search on the satellite - this will scan the satellite and give you an updated channel list. If you have a motor use USALS to send dish to 28.2 and then do a blind search. Regards.

[Manic01]

Yes mate I am ok with satellite boxes thanks.
I wanted a premade list thats all.
Try not to blindscan non linux receivers, all non linux recievers have a mac channels/tp/data storage limit.
By blind scanning sats, you will get loads of
a) useless channels
b) not required TP's
c) possible unwanted radio/data channels.
d) wasting your time deleting crap using channel edit etc.
e) filling your channel storage limit towards the max.

[digicon]

I did one for 28.2? around Oct time last year when i got the box for a customer, It took me 3 days on and off to do it by remote control.

But since it transpires that this thing Glitches through ethernet most of the time, and you have to rescan channels instead of reloading a premade one then its time to get shut of the box.

Apparently though Technomate have promised a Channel list editor for this box next month whether it materialises or not is another thing entirely

[Manic01]

Should be same list as TM3000 but with HD.
Latest patch 27/3/2012
Download center
Fixed,
1-Meadia player >Press F2 use >> on top of the exit button to find your files.
Trick play will be fixed next patch.
2-Hi bit rate hd channels fixed.
3-UTUB faster now but do not use resolution above 834x480 .hi res will be fixed next.
4-1080p upscale added for better picture quality.
5-utub search
6-Lazy off/on fixed
7-Lots relocating re naming fixed.

[Manic01]

Reports elsewhere are glitching is cured on new patch.

[Nutsandbolts]

Hi. I enjoy my Blind scans a lot. Problem with other peoples channel list is that you dont always get what you want. I do a blind scan on all my satellites once a month. I simply delete all the current Tp's and then do a blind scan which will give my an up to date channel list and TP's. Remember that with blind scans you can find channels like football feeds and news feed etc that sites like Kingofsat etc dont even know about. Regards.

[Manic01]

Blind scan for feed hunters only.

[pedro2000uk]

Hi. I enjoy my Blind scans a lot. Problem with other peoples channel list is that you dont always get what you want. I do a blind scan on all my satellites once a month. I simply delete all the current Tp's and then do a blind scan which will give my an up to date channel list and TP's. Remember that with blind scans you can find channels like football feeds and news feed etc that sites like Kingofsat etc dont even know about. Regards.

It's not a bad way of doing it .. we tested the TM5402HD on a fresh blind scan from a no channels/TPs start & it missed one [1] TP & that had an odd SR & just had radio & data on it.

Shame it can't put them in the order & populate favourites the way you want - that would be handy.


edit.. But I do agree you have to use blind scan with care or you'll fill a receiver with rubbish.. near frequency duplicates mainly, that take longer to remove

[Nutsandbolts]

Hi. I take your point with regards to duplicate frequencies. On the older TM5400 non super after a blind scan on Hotbird i use to end up with 5 lots of JSC SPORT 1-8. Probably to do with the sensibility of the LNB. On the TM5400 SUPER i dont get that problem anymore. Lets be honest most channels on satellites are rubbish due to language or contents. Everybody probably has a different way of doing things to you or me. I do prefer to experiment with my receiver because it helps you to understand how it works, especially when you have a problem which you are bound to sooner or later. Regards.