5402hd prio files

[bouncerdove]

Hi all.
A question. Is the prio file of any use with the 5402HD. If not how does the unit priotise channels (if it does at all).
Regards bouncerdove

[thijs]

prio file is no good on the non linux.
You can set your ecm-pids to the best working ones but it will be a lot of work and make sure to back up your channellist once finished.
goto a channel that is $ then press mute>exit>blue button
here you will find your ecm pids for this channel this will be set to default
change it to the next or first one you find and press ok and save move to different channel and back and see if channel opens quiker or at all if not move to next ecm-pid untill you use the one that works the best with server you are connected too
it's a lot off work but it brings down your ecm request time and you will see a lot less freezing or glitching.
As for your lines the tm connects to the line that has the quikest ping wich is not always the best server.
hope this helps