Technomate motor problem

[Nutsandbolts]

stab motors arent re-badged versions of anything AFAIA, regards mdt

You are spot on mdt. STAB is the italian company that invented USALS and EUTELSAT invented DISEQC. Motors like TM, DARK, ALSAT or whatever all use the same software under licence from STAB/EUTELSAT. If you look at your receiver you will see the names DISEQC and STAB USALS usually stamped on them. Again this is because receiver companies have licence agreements to use the motor software.

Regards.

[steve7776]

Quick update. I spent a couple of hours on Sunday trying to sort this. I moved the dish using Diseqc motor drive and eventually found Thor. I then Pressed go to centre, then recalculate position and saved. To my amazement, the dish now goes to all the sats ok using Usals. Still a bit amazed this worked and will have to wait to see if this fix worked...

[Nutsandbolts]

Quick update. I spent a couple of hours on Sunday trying to sort this. I moved the dish using Diseqc motor drive and eventually found Thor. I then Pressed go to centre, then recalculate position and saved. To my amazement, the dish now goes to all the sats ok using Usals. Still a bit amazed this worked and will have to wait to see if this fix worked...

Hi well done for making progress. As mentioned many times before with USALS you need to find the first satellite correctly and it will do the rest after maybe a few adjustments.

Regards.