Signal problem..28.2e>>>

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • .: JaCkPoT :.
    Retired Sat TV Addict
    • Aug 2008
    • 5607

    #1

    Signal problem..28.2e>>>

    hello..
    only recently i figured out that on 28.2e half the transponders now have no signal and the other half has snq of 51 even though it use to be well over 80 before.. all the sats beyond this have also stopped workin... however 8w, 5w, 1w, 5e, 7e, 9/10e, 13e, 16e, 19.2e, 23.5e all still work..i think its the lnb skew but yesterday they were working so what can it be?

    Read the Rules here; they apply to Everyone.

    ___________________
    In the good old days, I had
    DM800s HD
    Openbox S10
    TM500
    DM500s
    90cm FortecStar dish
    Maxx 110cm Dish
    Technomate 2300 Motors

    sigpic
  • benny/9
    V.I.P. Member
    • Nov 2008
    • 1964

    #2
    Originally posted by ..::|SaDiQ999uK|::..
    hello..
    only recently i figured out that on 28.2e half the transponders now have no signal and the other half has snq of 51 even though it use to be well over 80 before.. all the sats beyond this have also stopped workin... however 8w, 5w, 1w, 5e, 7e, 9/10e, 13e, 16e, 19.2e, 23.5e all still work..i think its the lnb skew but yesterday they were working so what can it be?
    ************************************************** **
    hi m8,
    i read a very simular post on anouther forum, and a member posted this
    there has been well over 100 changes on 28.2 east,19.2east & 13 east in the last 3 days, i dont know if it's a fact i dont look at 28e very often but a rescan might find the chns again for you
    Please Read Carefully!
    No Sky UK NDS Videoguard Hacking Discussions.
    Viewing Pay TV without a valid subscription is illegal
    the files available are kept for experimental & educational purpose only
    original vu duo2 /vu zero/ tm-nano-se. v-box / 36v /1.2 dish,

    Comment

    • .: JaCkPoT :.
      Retired Sat TV Addict
      • Aug 2008
      • 5607

      #3
      Just to confir please can some one just try tuning in to bangla tv please and tell me if it still works and the signal quality..
      This is a channel which my dad watches so he stays up to date with whats happening in his country..
      Cheers

      Read the Rules here; they apply to Everyone.

      ___________________
      In the good old days, I had
      DM800s HD
      Openbox S10
      TM500
      DM500s
      90cm FortecStar dish
      Maxx 110cm Dish
      Technomate 2300 Motors

      sigpic

      Comment

      • benny/9
        V.I.P. Member
        • Nov 2008
        • 1964

        #4
        Originally posted by ..::|SaDiQ999uK|::..
        Just to confir please can some one just try tuning in to bangla tv please and tell me if it still works and the signal quality..
        This is a channel which my dad watches so he stays up to date with whats happening in his country..
        Cheers
        ************************************************** *****
        it's a problem at your end mate every channel on astra 2
        has a signal level of 98 and a quality 92 on my tm 6900
        but i have a 1.2 dish and bangla tv is the same quality
        Please Read Carefully!
        No Sky UK NDS Videoguard Hacking Discussions.
        Viewing Pay TV without a valid subscription is illegal
        the files available are kept for experimental & educational purpose only
        original vu duo2 /vu zero/ tm-nano-se. v-box / 36v /1.2 dish,

        Comment

        • .: JaCkPoT :.
          Retired Sat TV Addict
          • Aug 2008
          • 5607

          #5
          cheers for your time dave..
          Im reflashing our reciever with original rm software then will repatch and see if that sorts it...
          will get back to you...

          Read the Rules here; they apply to Everyone.

          ___________________
          In the good old days, I had
          DM800s HD
          Openbox S10
          TM500
          DM500s
          90cm FortecStar dish
          Maxx 110cm Dish
          Technomate 2300 Motors

          sigpic

          Comment

          • aftermath
            V.I.P. Member
            • Mar 2008
            • 4345

            #6
            Sadiq, its ok here , signal strength 89%., on 11344MHz

            Comment

            • .: JaCkPoT :.
              Retired Sat TV Addict
              • Aug 2008
              • 5607

              #7
              update...still not working even though i have put on official tm software then patch..i have even factory resetted...
              will have to try without patch and no channel data tjhen take it step by step

              Read the Rules here; they apply to Everyone.

              ___________________
              In the good old days, I had
              DM800s HD
              Openbox S10
              TM500
              DM500s
              90cm FortecStar dish
              Maxx 110cm Dish
              Technomate 2300 Motors

              sigpic

              Comment

              • .: JaCkPoT :.
                Retired Sat TV Addict
                • Aug 2008
                • 5607

                #8
                i have done everything which doesnt require my dad gettin the ladder out[recut f-connector end, all types of software, fresh channel list] but still not working..my only other idea is to get out the fortecstar and see if that receiver receives any signal then that will tell me whether i need the dish sorting out or not.........

                Read the Rules here; they apply to Everyone.

                ___________________
                In the good old days, I had
                DM800s HD
                Openbox S10
                TM500
                DM500s
                90cm FortecStar dish
                Maxx 110cm Dish
                Technomate 2300 Motors

                sigpic

                Comment

                • benny/9
                  V.I.P. Member
                  • Nov 2008
                  • 1964

                  #9
                  Originally posted by ..::|SaDiQ999uK|::..
                  i have done everything which doesnt require my dad gettin the ladder out[recut f-connector end, all types of software, fresh channel list] but still not working..my only other idea is to get out the fortecstar and see if that receiver receives any signal then that will tell me whether i need the dish sorting out or not.........
                  ************************************************** **
                  a silly thing have you checked all the cables
                  are pushed home fully in the box, scarts after a time
                  get a bit of a sloppy fit
                  Please Read Carefully!
                  No Sky UK NDS Videoguard Hacking Discussions.
                  Viewing Pay TV without a valid subscription is illegal
                  the files available are kept for experimental & educational purpose only
                  original vu duo2 /vu zero/ tm-nano-se. v-box / 36v /1.2 dish,

                  Comment

                  • .: JaCkPoT :.
                    Retired Sat TV Addict
                    • Aug 2008
                    • 5607

                    #10
                    no because 8west to 23.5e atill work so cables must be okay

                    Read the Rules here; they apply to Everyone.

                    ___________________
                    In the good old days, I had
                    DM800s HD
                    Openbox S10
                    TM500
                    DM500s
                    90cm FortecStar dish
                    Maxx 110cm Dish
                    Technomate 2300 Motors

                    sigpic

                    Comment

                    • RICHARD SNELLER 53
                      Junior Member
                      • Jan 2009
                      • 20

                      #11
                      [QUOTE=.:|SaDiQ999uK|:.;164871]hello..
                      only recently i figured out that on 28.2e half the transponders now have no signal and the other half has snq of 51 even though it use to be well over 80 before.. all the sats beyond this have also stopped workin... however 8w, 5w, 1w, 5e, 7e, 9/10e, 13e, 16e, 19.2e, 23.5e all still work..i think its the lnb skew but yesterday they were working so what can it be?[/QUOhi saDiQ why have you changed you name

                      Comment

                      • alunfennell
                        V.I.P. Member
                        • Oct 2008
                        • 1525

                        #12
                        There is a bit of moving around taking place over the next month on Astra 2 this could be the reason .

                        SES ASTRA (Paris:SESG) (LuxX:SESG), an SES company, announced today that it will be moving the ASTRA 2C satellite from its current orbital position at 28.2 degrees East to 31.5 degrees East to take over the mission of ASTRA 5A which is no longer in service.

                        ASTRA 2C will be moved to 31.5 degrees East in March / April 2009 and will remain there for approximately one year. In the meantime, the services transmitted via 28.2 degrees East will continue to be broadcast from the other satellites co-located at this orbital position. ASTRA 2C will be able to operate 24 BSS transponders at 31.5 degrees East, thereby continuing the commercialization of this orbital position.

                        Following the launch of ASTRA 3B in the fourth quarter of 2009 and its subsequent deployment, another in-orbit satellite will be moved to 31.5 degrees East, permitting the return of ASTRA 2C to 28.2 degrees East and to enhance capacity at this orbital position.

                        Ferdinand Kayser, President and CEO of SES ASTRA, said: "The move of ASTRA 2C demonstrates our strong commitment to develop 31.5 degrees East into an important position, especially for Central and Eastern Europe. At the same time our fleet flexibility allows us to redeploy ASTRA 2C at 28.2 degrees East after the launch of Astra 3B in order to serve the growth in the UK market, particularly coming from High Definition (HD) broadcast services."

                        I have had the same issue on a 90cm dish last week very low signal, it went away after a day or so, but on a 1.4 meter dish no issue detected in signal Dreambox well over 90% but Technomate was showin 45-56% .


                        Regards:
                        Alun
                        **The Worlds Best Interactive F1 Strategy Game**
                        sigpic

                        Comment

                        • .: JaCkPoT :.
                          Retired Sat TV Addict
                          • Aug 2008
                          • 5607

                          #13
                          Figured out..dish bracket moved slightly to the right..
                          Just needed fine tuning and tightening..
                          All sorted now..

                          Read the Rules here; they apply to Everyone.

                          ___________________
                          In the good old days, I had
                          DM800s HD
                          Openbox S10
                          TM500
                          DM500s
                          90cm FortecStar dish
                          Maxx 110cm Dish
                          Technomate 2300 Motors

                          sigpic

                          Comment

                          Working...