my USB is gone TM6900

[finger]

hello,
after a thunderstorm my TM6900 HD Combo S doesn't see any USB on either connection, behind and in front. There is no power, I think, because I have a disk powered by USB and there is no light. I can read the disk with my PC.
Then I put a USB-stick, the Combo doesn't see him either.
Question: is there a easy way to repair this, I can solder...

Thank you for your hint.

Finger

[thijs]

could be the capisators open the box and see if the can shaped transitors are bulging/leaking you will have to replace them if it's that it would be cheap then.

[Manic01]

Make sure to turn power off first.

[finger]

thanks a lot both of you, I will try this this week and I will let you know.

[finger]

Finally I got the time to open my TM and I didn't find anything suspect. There is a cable between the two USBs, I took it of, but it still doesn't work.
The printed board is difficult to acces and finally I can't do anything. I believe it's not economicaly interesting to have the decoder repared.
Perhaps I will take the occasion to buy me a VU+ Duo?
Thank you for the help.
Ulrich