Tecnomate 31052 Help Please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cynderyn
    Junior Member
    • May 2009
    • 30

    #1

    Tecnomate 31052 Help Please

    My Box purchased NEW 11/05/09

    Model 31502D
    Present Firmware 1.97 March 26th 2009
    Present Loader 1.21

    Please can someone offer advice if I have a hardware problem or firmware bug causing this following problem

    The box recognises the USB only when powered on from mains
    Tecnomate Logo displays and USB found message displayed
    Press USB key on remote box displays found USB and you can record OK

    The box does not recognise USB if box is placed into standby mode and then brought out of standby mode
    No Tecnomate Logo displays no USB found message displayed
    Press USB key on remote box displays no USB found and you cannot record.


    What I have tried
    I updated original firmware to 1.97 by USB box accepted update and rebooted OK

    http://www.technomate.com/software_updates.php?model=TM-3500+D%2BUSB+and+TM-3150D+USB (TM-3150 USB @TM3500 D+USB Software)
    I set box to factory default


    I did try to update via RS232 interface but failed by using the
    http://www.technomate.com/software_updates.php?model=TM-3500+D%2BUSB+and+TM-3150D+USB using (TM-3500 D+USB Loader) because usr link (TM-3150D USB and TM-3500 D+ USB is not available
Working...