Help needed

[rookiedaz]

Hi

i have a technomate tm 500/600 motorised dish

i am struggling on how to set up,

i have been told to download dreambox and an image and a cccam to add channels

but still don't understand how to do this, my system is hooked up to my pc and my router but getting message no telnet password :-s

have I downloaded the correct things?

If not where can I download them from and what steps do I do to use them?

Any help would be appreciated

Thank you
rookiedaz

[manxspud]

Hi m8 do you have a 500 or 600 or both

Download the relevant img from here Download center

get hold of dcc (dream control centre then post back for nthe next steps (got to run ... sorry ... but some one else will jump in)

[rookiedaz]

It has 500/600 but download said 500super, thank you

[manxspud]

Stop

look on the front of your stb it cant be both

it will say Tm-500 / Tm-500 super or TM-600 Tm500 super and Tm600 use the same images Tm500 has its own ... ffs you must know what you bought

[rookiedaz]

Ah sorry mate I was looking at my remote, it's a technomate tm-m500 super

[rookiedaz]

Technomate tm-500 super

[manxspud]

Cool ... so you have the right img i'v had a tm600 does the 500 super have a usb port

update: just checked the specs and it dos't see digicon in thread so am sure he will finish off

If not ... here is a link to the miniweb update method

[URL="http://www.4shared.com/office/7uFxKWKe/Technomate_TM-500__TM-600_Mini.html"]Technomate TM-500 & TM-600 Mini-Web Guide - Download - 4shared[/URL]

How cool is that googled guide and my own 4shared upload from 2010 is top of list

[rookiedaz]

Thanks very much mate, will message again if I get stuck, help very much appreciated

[manxspud]

Your welcome ... just post back here if you need any more help ... will look in now and again ... plus lots of good lads in the sat section who will help out as well

[rookiedaz]

hi struggling a bit with dreambox, i have everything connected laptop to router and then router to technomate box, but get telnet connection for approx 2 secs then disconects, do u know what i am doing wrong?

[mdt]

hi struggling a bit with dreambox, i have everything connected laptop to router and then router to technomate box, but get telnet connection for approx 2 secs then disconects, do u know what i am doing wrong?

user and pass is wrong... use VuCC as it will let you login without a password. now ftp your keys to var/keys and your magic file to var/ect and your done. you can download C**am and Mgcamd from the addons server. i also add C**am.info and add @tonedeffs panel into /tmp,install and then add ecm.info to keep an eye on things. the tm e1 linux boxs can be a pain in the arse m8 but once set up should be fine,regards mdt

[rookiedaz]

do u know where i can download thisfrom the one i download was coming up access violation?

[rookiedaz]

At the min I believe I have installed the corrected image to my laptop, if possible could someone tell me what to do next? I have tried downloading dreambox but it saying no telnet login, I have tried uvcc but coming up access violation :-s , hopefully just need a step by step guide on how to set up my laptop to my router and technomate box, and then how to transfer the information over to box. Help would be much appreciated thank you

[rookiedaz]

also image is also saying unknown file type is this correct?

[rookiedaz]

Got everything up and running, image working, got dreambox up and running, I don't understand the cccam do I need to download them for channels to show up?