TM 5200d patches in responce to @adrianlegend"s PM

[dick b]

super M2 patch for TM 5200d

[jimbofz]

great ive been on patch 149 for ages ,updated the patch to 159 and updated the keys from your post .
sadly none of the thor ,or 7e chans open, any ideas?

[dick b]

they only open on certain boxes with keys.

see post#4 by @ digicon in the "help with latest softcam"thread for the way forward.

[arianlegend]

I'll try them and will post the result here.
If there is a channel list please post here.

Many thanks to dick b.

[arianlegend]

Well, good news is that it worked.<br>
uploaded the patch and they key file. However I have no idea which channels should be unlocked!<br>
For example, I tried ESPN and Euro Sport 2 but they are locked. It opens some of the $ channels.<br>
I used the attached channel list.<br>
Below is how I loaded the files:<br>
<br>
Insert the 'empty' USB Flash Drive into the PC<br>
Unzip the latest Technomate Original Software file<br>
Load/transfer the latest Technomate Original Software from the PC onto the USB Flash Drive<br>
Unzip the latest Phantompatch file<br>
Load/transfer the latest Phantompatch from the PC onto the USB Flash Drive<br>
Unzip the latest TMSoftcam Key file<br>
Load/transfer the latest TMSoftcam Key file from the PC onto the USB Flash Drive<br>
<br>
Remove the USB Flash Drive from the PC<br>
<br>
NB<br>
Remember to use the 'Safely Remove Hardware' utility on the taskbar before removing the USB Flash Drive from the PC (this avoids any possible corruption of files stored on the USB Flash Drive)<br>
<br>
Insert the USB Flash Drive into the TM-5200 D Super or the TM-5200 D<br>
Wait for the USB Flash Drive to initialize on the receiver...<br>
Press 'Menu' &gt; 'USB' &gt; 'Data Transfer' &gt; Enter PIN 0-0-0-0 &gt; then press the 'Green' button to 'Upload' the stored 'Channel Data' (aka) cndf file to your USB Flash Drive then check to confirm that the cndf file (channels/satellites/settings) has successfully uploaded to the USB flash drive and that it appears on the 'File List'... then press 'Exit' once...<br>
<br>
NB<br>
It is recommended that you keep a copy of your latest cndf file on your PC at all times and to update it regularly!!<br>
<br>
Go to 'System Settings' &gt; 'Factory Reset' &gt; PIN: 0-0-0-0 &gt; 'Factory Reset' &gt; Select 'Yes'<br>
Wait until the factory reset has finished then select your preferred language on the following screen<br>
<br>
Go to 'USB' &gt; 'Data Transfer' &gt; Enter PIN 0-0-0-0 &gt; select the Latest Technomate Original Software file from the 'File List'<br>
Wait until the Latest Original Technomate Software has finished loading and wait until the receiver re-boots<br>
<br>
Go to 'System Settings' &gt; 'Factory Reset' &gt; PIN: 0-0-0-0 &gt; 'Factory Reset' &gt; Select 'Yes'<br>
Wait until the factory reset has finished then select your preferred language on the following screen<br>
<br>
NB<br>
Next time you go to 'USB' &gt; 'Data Transfer' &gt; Enter PIN 0-0-0-0 &gt; you will notice that the Latest TMSoftcam Keyfile has disappeared from the 'File List'... this is totally normal and is due to the fact that the receiver does not have a patch loaded onto it at the moment...<br>
<br>
Go to 'USB' &gt; 'Data Transfer' &gt; Enter PIN 0-0-0-0 &gt; select the Latest Phantompatch from the 'File List'<br>
Wait until the Latest Phantompatch has finished loading and wait until the receiver re-boots<br>
<br>
Go to 'System Settings' &gt; 'Factory Reset' &gt; PIN: 0-0-0-0 &gt; 'Factory Reset' &gt; Select 'Yes'<br>
Wait until the factory reset has finished then select your preferred language on the following screen<br>
<br>
Go to 'USB' &gt; 'Data Transfer' &gt; Enter PIN 0-0-0-0 &gt; and select the cndf file (channels/satellites/settings) from the 'File List'<br>
Select 'Normal DB' then wait until the the cndf file has finished loading<br>
<br>
Go to 'USB' &gt; 'Data Transfer' &gt; Enter PIN 0-0-0-0 &gt; and select the cndf file (channels/satellites/settings) from the 'File List'<br>
Select 'Default DB' then wait until the the .cndf file has finished loading<br>
<br>
Go to 'USB' &gt; 'Data Transfer' &gt; Enter PIN 0-0-0-0 &gt; and select the Latest TMSoftcam Keyfile from the 'File List'<br>
Wait until the the Latest TMSoftcam Keyfile has finished loading<br>
<br>
Go to 'Installation' &gt; 'Options' and set all AU options to 'OFF' &gt; press 'Exit' &gt; Settings were changed - Do you want to save? &gt; select 'Yes'

[dick b]

that channel list is out of date I think.If you can try and compile your own using "flysat",KOS, or one of the others.I gave that list a quick check with a clarke tech editor and it wont have all the channels your after.you can try this one of mine if you want its only a rough one but does have most of the channels you want.

[arianlegend]

It's absolutly brilliant that you uploaded the channel list. very kind.
It look like the zip file is damaged. It does not open.

[dick b]

It's absolutly brilliant that you uploaded the channel list. very kind.
It look like the zip file is damaged. It does not open.

I have just downloaded the file and its fine it unzipped and checked out ok. if you are using internet explorer that may be the problem

[arianlegend]

Hi dick,

I tried it from home and it's absolutely fine.
Good selection and the channels open. Success!

Thank you for your help.

[zee24]

Hi guys is the TM5200D a good box?? Just looking for a cheap box simple to use on 28.2e

[jonmuss]

As a complete newbie, could you explain how i update the channel list on the TM 5200 d.

[mdt]

it takes 2 mins via the usb stick... get your list and transfere in the usb menu. heres a recent multi-sat list from @william-1 thats FTA and softcam.regards mdt

[jonmuss]

I tried to use the above channel list on my tm5200d super but it would not load, is the tm5402hd channel list compatible with the tm5200?

[satdoc]

hi
will this patch work on the tm5400ci super ?

[dick b]

hi
will this patch work on the tm5400ci super ?

no you need this one