Tcecnomate 6800 HD (non Super)

[markwi]

Hi Guys, Have downloaded the latest(?)patch software,692p, for a friend and was wondering if the Biss side of things work.Hoping to get 27.5W.
Cheers.Mark

[mdt]

Hi Guys, Have downloaded the latest(?)patch software,692p, for a friend and was wondering if the Biss side of things work.Hoping to get 27.5W.
Cheers.Mark

hi, the sd channels should work ok but the hd audio doesnt work due to the box not coping with h.264 audio,regards mdt

[badboy1965]

hi markwi, and welcome to dk, the last patch I put on my tm 6800 hd non-super was 706.stb and the 1 before that was 702, hope this helps

[markwi]

Many thanks,Guys

[markwi]

Ok,my m8 in Malaga bought a TM 6800HD on E-bay(?40) but he's unable to get a signal on 11495 V 44100 ,27.5W .He's got 7.06p software and a channel list I did for him that works fine on my Super.He can get channels on 30W ok and then move the dish 1.4 degs up and 3 degs ccw to get onto 27.5W,and then searches around there.The lnb is set at 27degs ccw from behind the lnb,in front of the dish.Edit...he also did factory reset and he has a 1.2m dish.Any ideas would be greatly appreciated.Cheers Mark

[mdt]

maybe he has a line of sight issue... can you not go to his house with your stb to rule this out? regards mdt

[markwi]

I think it's ok but I'll double check.I'm in Italy so probably won't be dropping in .Cheers

[markwi]

Does anyone have a non-Super TM 6800 HD pointing at 27.5W....and working?Cheers

[digicon]

I am afraid the Non Super 6800 cannot cope with the High Symbol Rate in DVB-S2 specifically 44100sr

the only range of TM receivers compatible with 27.5? west are these: 6800super,6900super,6902super,7100,7102,5402,5302, 5502,8000,TM Mini,TM F3/5.

If you want to look at other brands that are compatible: Dr HD F15,D15,F16,Grand,Grand Triple Clarke tech: 5000,5100,4100