Quali-TV QS-1080IR

[floppybunny]

Hi Can anyone answer some questions on this box please?

1.I want to get this box to view 4:2:2 feeds direct from monitor not via pc,will it do the trick?
2.Can i add it to my technomate tm-5402hd and use both from one dish switching to this unit when a 4:2:2 feed is shown?
3.Does it have the facility to enter biss codes?
4.Is it easy to use & set up like the tm-5402hd


Any help appriciated.

[digicon]

If i can remember there are 2 versions of this receiver and they are pretty old plus i believe the firmware is pretty hard to get hold of for that particular model the IR version.

Also take into account these are DVB-S only so if the 4:2:2 feed is on a DVB-S2 transponder your screwed and it has no blindscan, i have enclosed information on the other version all thanks to Zorch from DW for the info

You could loop out of the 5402 and connect the Quali as a slave unit

[floppybunny]

If i can remember there are 2 versions of this receiver and they are pretty old plus i believe the firmware is pretty hard to get hold of for that particular model the IR version.

Also take into account these are DVB-S only so if the 4:2:2 feed is on a DVB-S2 transponder your screwed and it has no blindscan, i have enclosed information on the other version all thanks to Zorch from DW for the info

You could loop out of the 5402 and connect the Quali as a slave unit

Thanks again Digi - i understand - best search elsewhere.Can't seem to find a unit to view 4;2;2 easily?