technomate 2t nano (no picture ) help please

[venza1]

Just wondering if anyone could help me i took my hdmi cable out of my box to change living room around when i put all cables back in everythink was fine untill this morning i went to turn my box on and all i got was the boot logo nothink else ? i looked at the box and it was loading normal i evebn did a software flash all was fine ? on screen instructions etc but when i restart the box and it loads i dont get anythink on screen ive tried video cable and it works fine . i thought to put this message up just in case someone else has had the problem and how they fixed it thanks in advance for any replies

[venza1]

wont work through hdmi but works fine through video (yellow wire )

[cactikid]

have you moved hdmi on tv to other port or not plugged in and some tvs need the port to be told to switch on hdmi.

[digicon]

I hope you get this fixed but for future reference HDMI is powered on all devices its only a small current but when unplugging from TV and or other HDMI equipment always power them off first

[venza1]

i unplugged from the sat box when i moved the stuff around i tried all ports on the hdmi on the tv side but nothink comes on the tv other then the boot logo on the sat box thats what i cant understand it shows the openpli on screen flashes twice like normal then nothink else other then the loading information on the box itself

[markwi]

Try another cable.In situations like this it's more likely to be a faulty cable than the tv or the receiver.Sorry to go on but,as digicon says,power off before unplugging.Cheers. Mark

[Loboaki]

key have changes