Hi all.
After change in 2*.5 w biss keys I have no unscrambled channels.
Have entered new keys but still blank screen.
Can anybody talk me thru process to see where going wrong?
Digicon tells me that its a Linux receiver but so much stuff in dreambox and Vu would not know where to start.
Could it be the loader if there is one, am struggling with the technical side of sat boxes and patches, cams, etc
Screen shows 17 channels in list for 27.*w but says , no video or scrambled channel,
This is what done up to now.
Did factory reset, installed all patches from 2013 to newest 06/06/14 in sequence.
Installed channel list.
Entered biss code under patch menu.
Has the factory reset caused me to loose some software or something required to use the keys.
Hardware version 1.02
Software version 1.64
Loader version 2.00
Have also just done a scan of 11495 which lists all channels on the transponder but only as radio channels not tv.
Help much appreciated.
After change in 2*.5 w biss keys I have no unscrambled channels.
Have entered new keys but still blank screen.
Can anybody talk me thru process to see where going wrong?
Digicon tells me that its a Linux receiver but so much stuff in dreambox and Vu would not know where to start.
Could it be the loader if there is one, am struggling with the technical side of sat boxes and patches, cams, etc
Screen shows 17 channels in list for 27.*w but says , no video or scrambled channel,
This is what done up to now.
Did factory reset, installed all patches from 2013 to newest 06/06/14 in sequence.
Installed channel list.
Entered biss code under patch menu.
Has the factory reset caused me to loose some software or something required to use the keys.
Hardware version 1.02
Software version 1.64
Loader version 2.00
Have also just done a scan of 11495 which lists all channels on the transponder but only as radio channels not tv.
Help much appreciated.
Comment