Default Saving your DEFAULT channel list on the TM5000usb & TM6000HD series
Before loading any new software take advantage of the advanced facilities available on the TM5000usb series & TM6000HD series by saving your transponder & channel lists:-
1/Menu
2/System setting
3/Factory reset
4/Save as DEFAULT channels "perform this operation twice for your modified transponder & channel list to become your DEFAULT list,
Then when you load a new Magic patch you will not loose your settings,
1/Load new or old Magic patch,
2/Factory reset >>>select factory reset in menu,
3/Factory reset >>>now select restore DEFAULT channels (This will restore your modified transponder & TV channel list "max 3000 tv channels"}
It you experience problems such as re-booting ect then go back to the previous software following the steps above.
This proceedure only applies to the TM5000usb sereis & TM6000HD series
Before loading any new software take advantage of the advanced facilities available on the TM5000usb series & TM6000HD series by saving your transponder & channel lists:-
1/Menu
2/System setting
3/Factory reset
4/Save as DEFAULT channels "perform this operation twice for your modified transponder & channel list to become your DEFAULT list,
Then when you load a new Magic patch you will not loose your settings,
1/Load new or old Magic patch,
2/Factory reset >>>select factory reset in menu,
3/Factory reset >>>now select restore DEFAULT channels (This will restore your modified transponder & TV channel list "max 3000 tv channels"}
It you experience problems such as re-booting ect then go back to the previous software following the steps above.
This proceedure only applies to the TM5000usb sereis & TM6000HD series
Comment