Can't find 907 with motorised system all others ok

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Yogibear1056
    Newbie
    • Nov 2014
    • 3

    #1

    Can't find 907 with motorised system all others ok

    Please can someone help, am in Croatia and have just installed a tm5402m3 don't seem to be able to find 907 but have a 90 percent on hispasat 30w 0n a 100cm dish and motor.
  • markwi
    Top Poster
    • Jan 2014
    • 133

    #2
    I'd try a new channel list first : Download center .Make a note of your USALS settings(if you use) and backup your existing channel list before you load the new one.Cheers

    Edit: Just had a look at satbeams.com and think you'll be lucky to get Intelsat 907 with a 100cm.I'm on the east coast of Italy (near Ancona) and only just get it with a 1.2m.Good luck.
    Last edited by markwi; 10 November, 2014, 17:52.

    Comment

    • Yogibear1056
      Newbie
      • Nov 2014
      • 3

      #3
      Originally posted by markwi
      I'd try a new channel list first : Download center .Make a note of your USALS settings(if you use) and backup your existing channel list before you load the new one.Cheers

      Edit: Just had a look at satbeams.com and think you'll be lucky to get Intelsat 907 with a 100cm.I'm on the east coast of Italy (near Ancona) and only just get it with a 1.2m.Good luck.
      Hi markwi, ime on the coast in zadar,should I be getting some sort of signal or just go bigger

      Comment

      • Yogibear1056
        Newbie
        • Nov 2014
        • 3

        #4
        Hi m8,
        patched it last night and put in new channel list did a search not a bean maybe a bigger dish then but I did hear you have to angle back the dish?

        Comment

        • markwi
          Top Poster
          • Jan 2014
          • 133

          #5
          Yes,I'd go along with that.Fine tune the dish for elevation,azimuth and lnb skew on 907.You should just get a signal but really you'll need a bigger dish,I'd say.cheers

          Edit.Try stressing(gently) the dish back or forwards to see if you get a signal
          Last edited by markwi; 10 November, 2014, 19:31.

          Comment

          Working...