tm600 no internet connection

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • daveking253
    Newbie
    • Aug 2014
    • 15
    #1

    tm600 no internet connection

    Hi all

    I have a tm600 and was watching tv last night and decided
    to try another cccam.
    After that it went off.
    Now it wont let me download any softcams,all I get is cant
    connect to internet.

    I can connect to the receiver with dream box edit but cant
    get the tm600 to connect so I can download.

    Tried changing communication settings but no luck.
    I even done a factory reset and another image.
    Now I have a receiver with no cccam.

    Any help with this please..

    Thank you all in advance.
    dave king
    Tags: None
    • mdt
      V.I.P. Member
      • Feb 2009
      • 3034
      #2
      teach you not to mess about with a working system when you dont know what you are doing. re-flash the box as it has 2 cam,s built into the IQimage. then ftp the magic details in again into var/ect or var/keys dependent on system used. cant go into depth as its against rules,regards mdt
      DM800HDSE SIM 2.10. SSL84D OPEN-ATV ORBITAL 80CM/DARK MOTOR/IBU/53E-30W

        Comment

        • daveking253
          Newbie
          • Aug 2014
          • 15
          #3
          Hi
          thanks for your reply.
          I have re-flashed and there is no where to put
          the magic details.
          Just a blank page.
          I have an old dm500 was wondering if I could copy and paste
          the that page where the magic starts into the tm page in dm edit.
          Flashed many time's and many box's never had this problem before.
          At the moment I have an old image I used when I first got the Tm a
          few years ago,,it worked then but not now..

          Thank again.

          dave king

            Comment

            • DOUGALMCD
              V.I.P. Member
              • May 2011
              • 3229
              #4
              Try doing it via miniweb turn box off and hold power button switch back on keep holding power button till it shows you last digit or digits of ip. Enter ip address in your computers browser press enter and should show mini web on screen which you use to enter files etc hth

                Comment

                • daveking253
                  Newbie
                  • Aug 2014
                  • 15
                  #5
                  hi
                  Thank you for your reply ,,I will try that.

                    Comment

                    • daveking253
                      Newbie
                      • Aug 2014
                      • 15
                      #6
                      Hi
                      Just tried the miniweb,all I get is the bars in the display
                      going in circles.
                      Held button for over 5 mins.

                      How do I update by usb stick.

                      thank you.

                      dave king

                        Comment

                        • daveking253
                          Newbie
                          • Aug 2014
                          • 15
                          #7
                          HI
                          got miniweb working and installed the image.

                          Now back to square one,,No internet connection.
                          I have internet at the cable for the tm600 as I tested it with a laptop.
                          I have tried every setting in expert menu but no luck.

                          Thanks

                          dave king

                            Comment

                            Previous template Next
                            Working...